hey guys, searched without a good resault.. i just got my bazzaz Z-bomb from fed ex today.. all it says is to plug it inline on the gear posistion sensor.. plugged it in where i thought it should go(wire colors matched and looked like same wire from gps) but my fuel pump didnt make any sound nor would it start.. HELP!!!:banghead
craigw_82
Then you probably have connected it to the wrong plug.
The one you are looking for is on the left side of the engine.
Think I remember it was white on my K6
Here's two crappy pic's of the nikko I put on mine
![Image]()
![Image]()
The one you are looking for is on the left side of the engine.
Think I remember it was white on my K6
Here's two crappy pic's of the nikko I put on mine
Does this help? Assuming you haven't mountet the ZFI-TC yet...
Is the z-bomb an extra option on the Z-FI-TC, so that all 4 functions come in the same "black box"? Or is the z-bomb, an additional "box" in addition to the ZFI-TC box?
http://www.youtube.com/watch?v=JQsR-T6WzzM
Is the z-bomb an extra option on the Z-FI-TC, so that all 4 functions come in the same "black box"? Or is the z-bomb, an additional "box" in addition to the ZFI-TC box?
http://www.youtube.com/watch?v=JQsR-T6WzzM
It's a tre , like healtech and others.
Connects inline into the gps like all other tre's.
Nothing to do with the zfi
Connects inline into the gps like all other tre's.
Nothing to do with the zfi
thanks guys... i had the right connectors.. bazzaz just had the wires wrong crossed in their connectors. i pulled them apart, fixed their f*ck up and it worked great.. i called bazzaz and let them know and emailed them some pics.. installed it and also put a BMC filter on.. very nice low budget mods!
unk
unk-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
