I need to know how many would be interested in a bypass kit with full instructions including pictures and all hardware to eliminate the need to pull the clutch in to start your bike. This would not change your map and you will not lose any HP because when the starter button is not pressed in everything works like normal. The best part is the install only takes 5 to 10 minutes depending on your skill level. This was the first thing I did to my bike because I absolutely hated to have to pull the clutch in and put on my gloves and helmet. I have noticed numerous amounts of threads saying this can’t be done or so on. It’s possible and I have done it and I would like to share. I’m thinking about $20.00 per kit should cover all the parts and shipping inside the US. But for me to do this I will need at least 20 people to be interested because shipping is obviously going to cost me more for some than others and I think I can at least break even with this amount. Let me know what you think and feel free to pm me with any questions. When I have enough interested I will post them on ebay for the people that would feel more comfortable buying them that way, or we could make other arrangements.
zreuan
All I did was bypass the switch.It lowers the rev limiter by 200rpm but does not effect horsepower.Mine ran a 9.67 at 150mph last weekend
there is no need to dyno because there is no change to the bike until you press in on the starter button. The only way it will change anything is if you ride around and hold down the starter button the whole time. This will also work for those who want to take the electricles off.
Ok here is a link on how its done. I just thought that som people whould like it all set up for them with instructions not everyone knows what a relay is. http://www.gixxer.com/forums/showthread.php?t=92113&page=6
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
