**98 SRAD 600**
The right bulb (when in riding position), quit working, or burnt out. I figured I would try a replacement bulb - instead of going back to halogen..
I'm getting conflicting information.
The PIAA website says H4 for low beam, H7 for high beam.
Some forums say H7s, others say H4s for the SRADs.
All I can do is go by the wattage, and "plug configuration".
The wattage for the ones I have found are 12V 60/55W, whereas our manual says 12V 55/50W. Here's the link:
2X H4 120 LED Conversion 12V Headlight Replacement Bulbs Bright White 6000K 3 | eBay
Also I am also concerned about the LEDs functionality - how would an LED work as a hi/lo beam? Halogens have two filaments for this function. If I am correct, which I doubt I am, SRADs should have both lights on all the time, and both lights work as hi beams when switch is engaged?..
Can y'all help me?
Thanks
JG
The right bulb (when in riding position), quit working, or burnt out. I figured I would try a replacement bulb - instead of going back to halogen..
I'm getting conflicting information.
The PIAA website says H4 for low beam, H7 for high beam.
Some forums say H7s, others say H4s for the SRADs.
All I can do is go by the wattage, and "plug configuration".
The wattage for the ones I have found are 12V 60/55W, whereas our manual says 12V 55/50W. Here's the link:
2X H4 120 LED Conversion 12V Headlight Replacement Bulbs Bright White 6000K 3 | eBay
Also I am also concerned about the LEDs functionality - how would an LED work as a hi/lo beam? Halogens have two filaments for this function. If I am correct, which I doubt I am, SRADs should have both lights on all the time, and both lights work as hi beams when switch is engaged?..
Can y'all help me?
Thanks
JG