Suzuki GSX-R Motorcycle Forums Gixxer.com banner
Cancel
Create thread New Forums

need wiring diagram for 1997 gsxr 600 (needs to have white wire)

1 reading
Jump to Latest
21 - 40 of 186 Posts
#23 ·
Have you got a multimeter. That the relay is getting voltage when the starter is pressed. If you get voltage check that the relay has a good earth. If all that checks out then a new relay for you.
 
Save
Reply Quote Like Like
#26 ·
You want to check the feef from the starter switch. That will be 3 on your diagram. Cannot tell the colour as i cant see the colour properly
 
Save
Reply Quote Like Like
#33 ·
You will be checking plug 2. It will a switching voltage use the wiring diagram to work out the colour of the wire frim the starter switch.
 
Save
Reply Quote Like Like
#35 ·
I think I figured out what wires you need to check.

You might want to disconnect the battery first.

with the meter, one lead to Yellow/green trace off the plug

the other lead to the frame

press the starter button and check for continuity.

if there is none, check the connection to the to the switch block for corrosion, unplug it and clean it.

try again
 
Save
Reply Quote Like Like
Discussion starter · #36 ·
ok i took the reading from red and black/white and got the same reading not pushing the button as with pushing the button which is the same as the battery. i then tried yellow/green and black and got nothing at all. i feel like maybe theres a blown fuse or something because when i push the starter button absolutely nothing happens
 
Discussion starter · #37 ·
stoker283 said:
I think I figured out what wires you need to check.

You might want to disconnect the battery first.

with the meter, one lead to Yellow/green trace off the plug

the other lead to the frame

press the starter button and check for continuity.

if there is none, check the connection to the to the switch block for corrosion, unplug it and clean it.

try again
Click to expand...
opps i didnt see your post when i posted i will check that now
 
#39 ·
I just realized you will need the clutch pulled as well to close the clutch safety switch.

wrap a zip tie around the clutch so you dont need extra hands :)
 
Save
Reply Quote Like Like
Discussion starter · #40 ·
stoker283 said:
I think I figured out what wires you need to check.

You might want to disconnect the battery first.

with the meter, one lead to Yellow/green trace off the plug

the other lead to the frame

press the starter button and check for continuity.

if there is none, check the connection to the to the switch block for corrosion, unplug it and clean it.

try again
Click to expand...
ok so using the equipment pictured below i tested the wires with battery connected and disconnected and got a 3.7 reading both times
 

Attachments

21 - 40 of 186 Posts
About this Discussion
185 Replies
11 Participants
Last post:
TwistedMister
Suzuki GSX-R Motorcycle Forums Gixxer.com
posts
6.5M
members
249K
Since
2000
A forum community dedicated to the Suzuki GSX-R motorcycle. Discuss the GSX-R600, GSX-R750, GSX-R1000, and GSX-R1100, and more!
Full Forum Listing
Explore Our Forums
General Bike Talk 06-07 GSX-R600/750 GSX-R1000 General Forum Photos & Videos The Original Farm