Anyone with stock rear susp?

ds5381 · Aug 13, 2012

I need a measurement from the ground to a point on the rear subframe if your running stock rear spring. Any help would be much appreciated. Thanks

Chugs · Aug 13, 2012

Stock rear spring sag setting is in the service manual if that is what your looking for?

ds5381 · Aug 13, 2012

No chugs but thanks. I installed an ohlins shock but ride height is way off. My retarded self forgot to measure before the install.

hamill12 · Aug 19, 2012

The measurement you requested is 652mm from the center of the lower left hand pillion bracket to the ground.

ds5381 · Aug 21, 2012

Thanks hamill. Was that measured with the bike on the side stand?

TheGeek · Aug 21, 2012

That measurement won't really help you. You just need to match the eye to eye length. I'll garuntee you the measurement you're taking is going to be different based on tire, tire pressures, free sag, etc.

Take your old shock, measure it, and then match it on the Ohlins.

ds5381 · Aug 21, 2012

TheGeek said:
That measurement won't really help you. You just need to match the eye to eye length. I'll garuntee you the measurement you're taking is going to be different based on tire, tire pressures, free sag, etc.

Take your old shock, measure it, and then match it on the Ohlins.

Thanks.

Anyone with stock rear susp?

ds5381

Chugs

ds5381

hamill12

ds5381

TheGeek

ds5381

Top Contributors this Month

Recommended Communities