I'm just retarded. I pulled another "koolaid"... As some of you know the other day I took the bike on another test ride and the sifter lever magically came unbolted from the shift lever. I had to pull over and put it in 3rd gear by hand to putt on home. It sucked. I was annoyed by YET another problem with the bike even though it was a small one, so I put her in a time out and didn't talk to her for a few days. UNTIL... I was forced to. I had to make it to a dr. appt to get my head shrunk and right before I walked out the door I realized my keys were still in the wife's minivan from the PA trip and she was at work. SO.... I ran out to the garage, bolted up the shifter arm/lever, checked the gas just to be sure I had enough to make it..... It was a little low, so I was just going to throw some in from the mower gas can. When I realized it was in the shed locked up and would take me all of 2 min to go get it I decided I had enough and could just fuel up after my appt. SO, I jumped on the bike and took off....
WELL.... halfway there I looked down and guess what :hammer no gas cap. After deciding not to gas up at home I never fully screwed the cap back on :cursing. So no more purty, shiny, raised "S" gas cap. It wasn't high quality like a vortex racing cap or anything, but it wasn't just a $20 cheapo either. I found a few others on ebay, but just the cap is around $60 and I'm not sure if it will fit the base I have. They said it will fit a vortex base, but I'm PRETTY sure that's not what I have and not sure what the thread pitch is and they won't measure for me
OR..... I could get one of these that include the base....
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=140323324133&sspagename=STRK%3AMEWAX%3AIT&viewitem=
I'd rather this one be polished, but could always paint it :dunno they only have black.
Or this quick release one.... not sure .....
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130309270545&sspagename=STRK%3AMEWAX%3AIT&viewitem=
thoughts or other suggestions???
WELL.... halfway there I looked down and guess what :hammer no gas cap. After deciding not to gas up at home I never fully screwed the cap back on :cursing. So no more purty, shiny, raised "S" gas cap. It wasn't high quality like a vortex racing cap or anything, but it wasn't just a $20 cheapo either. I found a few others on ebay, but just the cap is around $60 and I'm not sure if it will fit the base I have. They said it will fit a vortex base, but I'm PRETTY sure that's not what I have and not sure what the thread pitch is and they won't measure for me
I'd rather this one be polished, but could always paint it :dunno they only have black.
Or this quick release one.... not sure .....
thoughts or other suggestions???