[TX1000K6]

I looked in my manual, but it doesn't cover how to replace the rear turn signal bulbs, only the fronts. I took the one screw out of the turn signal lens, but it seemed like it was still connected somewhere. How exactly do i replace the bulb? Do i just remove the one screw and pull the lens off?

 

[spcmedic]

Unscrew and pull off the cover.. be careful though there is a small clip/tab at the top of the cover that has to break loose and it will break off if you are not careful.

 

[TX1000K6]

So how do i remove the cover, and not break the little tab off?

 

[triplestack3]

So how do i remove the cover, and not break the little tab off?

carefully

 

[2THRU]

You kinda "pinch" the lens and carefully pull straight out. I replaced mine with silverstar bulbs and thougt I was going to break them....just seems that way. Take your time:cheers

 

[TopSecret]

You could also use a tiny screw driver and lift up the top part of the body work ... the clip is there and it might make it easier...