www.mrcycles.com for all stock parts

www.motomummy.com for all aftermarket parts

Between those two site you can get everything you need.

 

Everything broke, bent, or cracked needs replaced. It is crazy to ride on anything tweaked. Pictures would help.

 

Thanks for the so quick replies. Pics attached.

I mostly need to know what my missing parts are for my gear shift (Foot shifter).

Thanks for the motomummy site. I couldnt remember it from when I first was going to replace my handle grabbers.

Again... one thing you can't see in the pics is the whole handlebar is bent. I think i need the whole thing as I cant see how else the left would attach to the middle part.

 

So you need rearsets, clipons, a mirror and a lever.

 

And possible a stator cover if it is leaking oil.

 

I can't tell if the linkage for the shifter is toast or not on my phone.

 

If you are talking about the shift rod, most rearsets come with a new one.

 

I was and I gotcha.

 

Thanks again guys. I really appreciate the quick help.

The first pic is something else I need... its bent. You cant tell by the pic, but my clutch lever sits lower than it should. Basically the peice that holds the lever.

What's the best place for fairings? Other pics show the damage.

The drippage i think is from the stator cover from when I just checked.

 

Also... what are clipons? I cant find them?

Other pics attached

 

For OEM fairings, see if you can get a clean used OEM set. You can become a site sponsor here and gain access to our classifieds section.

For inexpensive aftermarket fairings, check out site sponsor Auctmarts.

The bent part that hold the lever is called a clutch perch.

 

Thanks again fellas!

So this doesn't really seems as bad as what I thought then right? Pretty much everything that I need I can get aftermarket, or is there anything that you think I should go oem on other than fairings?

 

Clip ons are the handlebars.

 

Thanks. Turns out the clip-ons weren't bent. They the clutch lever had just rotated and I was able to get it back into position. This eliminates one thing so I can get rearsets and a mirror to at least get it to a shop for a full inspection without having to tow it.

Unfortunately, motomummy does not have a rearset the includes the shift rod and foot clutch for my bike (both are bent).

Any other source that you all can recommend for a full rearset? I need the foot clutch and brake to come with it as I just spent some time looking at what it would take to add an aftermarket, and I'm just not that good.

 

Sure they do...

https://www.motomummy.com/vortex/vortex-rearsets-with-brake-switch-tshirt/

 

Oh... thanks!

 

If it were me I would remove all the plastics and go through the bike to see what parts you need. The plastics are easy (but pricey) to replace.