[tetsing]

i recently picked up the yoshimura r55.
so i was wondering if the k7 RIGHT passenger foot peg will fit on a k8.
differnece being that the k7 doesnt double up as an exhaust hanger for the stock muffler so there is no "hole" on the k7.

 

[Stew600]

I went to the Suzuki website and looked at both the '07 and '08, it looks like it should fit the '08. What bike do you have? If you have the k8 already why you tryin' to fit the k7 peg on it? did you brake it?

 

[Suzuki Duke]

If somebody posts up some measurements of the K8 pegs, I can do the same for the K6 and we'll see if they match up.

I know people that went with the Yosh exhaust on the K6/K7 installed the right peg from a K4/K5 so they didn't need a seperate hanger bracket for the can.

 

[THUNDERCAT]

You can run the 06-07 rear pegs and front rearsets on the 08 models. I am assuming your trying to get rid of that tab on the right side from the 08 OEM exhaust. I've tried it and they work. You can also look up the rear frame in the parts fiche and notice the part numbers are the same for 06-07 to the 08. THe holes are the same and in the same position therefore they are interchangeable

 

[kyle4213]

Yea they fit I sold mine to someone with a K8...

 

[tetsing]

yea i wanted to keep the passenger pegs for whenever i ride 2up but little hole on the right peg was an eyesore.

 

[Stew600]

yea i wanted to keep the passenger pegs for whenever i ride 2up but little hole on the right peg was an eyesore.

Yeah, I just bought an exhaust hanger from evo-tech for my stock exhaust until i get my akrapovic full exhaust, I never use my passenger pegs so im gonna take them off. that little hole looks like shit!!!!!!:cheers

 

[vansnxtwk]

Lol thats why I filled that hole w/ the o.g. bolt and nut. A random hole wasnt cuttin it lol....Im gonna try to get an 07 peg setup off of ebay.

 

[aL8eR7]

I will 2nd the confirmation. They do fit. I put my old K7 ones on my K8 for a day.

 

[AFitchguy07]

i have k8 and need to replace the right pass peg. if i look to buy just the right ONLY (k7/k6) would the stock k8 left match in looks to the right k7/k6? basically im asking if the left pass pegs are identical from k6 - k8?