It's time to rock 'n' roll!
unk
$459BOB how much did your brother pay to have his valves adjusted?
I knew it was somewhere around $400. From what i've seen in the two engine i've seen afterwards they only change shims on those valves that are out of spec. Not good in my opinion.$459hmy
Problem is that if you have a bunch of valves on minimum spec they will be too tight the next time you check it. Last time I did mine I ended up with 4 exhaust valves on the minimum of .008 which means they should be tighter when I check them tomorrow. I'll let you know what I find.Isn't that what you're supposed to do?
thanks for the offer but I plan on logging some serious mile on my 675 this weekendBry, I'm only going down on Mon morning for the day. If you wanted to go, you can ride down w me.
:facepalmSame goes for racing :shifty
:scaredMcSleepy needs someone to nudge him while he's passing out behind the wheelhmy
40 laps @ 4 crashes per lap?tonight. at least 40 lapsunk
160+ crashes :cool40 laps @ 4 crashes per lap?
While crashing into each other is fun, tight inside passes at speed are more fun.160+ crashes :cool
indeed I do. I was going to PM you earlier this week about them. I will dig them up tomorrow and box up em for you if you want them? PM me your address..Bryan I keep forgetting. You still have those pins for the Pit Bull?
Should be the same for the 06-07. I'll double check with them in a few minutes.indeed I do. I was going to PM you earlier this week about them. I will dig them up tomorrow and box up em for you if you want them? PM me your address..
just to re-clarify things. the pins were for a k5 gsxr 600
:gtfo :bitchslap that is all :franticShould be the same for the 06-07. I'll double check with them in a few minutes.
Intruder.:flipoff:gtfo :bitchslap that is all :frantic
No I need the pins for the restraint. I have both size pins for Deb's Vortex stand.:cheersHey Nelson I have a pitbull pin in my toolbox for a front stand. I think its for a gsxr but not sure. No idea where it came from but its there if u want it.
Gixxer axles are the same.No I need the pins for the restraint.