Check out my new guage lights. Heres some pics before and after.
unk
unk
Check it out!
Will750GSXR
21 - 36 of 36 Posts
Joined
·
30 Posts
Hey guys, I thought I would stop by and answer a few questions.
Here are some pics I took to specifically answer this question (I get it a lot). You can definitely see everything in the daytime.
(Click on the picture for a full size image)
Gauges on in direct sunlight. NOTE: I took this picture at an angle due to the sun glare on the gauge cover, but in person you can see everything perfectly.
Here is a picture with the gauges off in direct sunlight.
As for the redline start point, the GSXR 1000 has a black face that ends at 15,000 RPM, the GSXR 750 has a white face, and ends at 17,000 RPM and goes every 2,000 RPM. The GSXR 600 goes to 18,000.
GSXR 750 gauges:
![Image]()
GSXR 1000 gauges:
![Image]()
I don't have a pic of GSXR 600 gauges.
Notice the needle is also different.
-Paul
sevenfiddy said:
Here are some pics I took to specifically answer this question (I get it a lot). You can definitely see everything in the daytime.
(Click on the picture for a full size image)
Gauges on in direct sunlight. NOTE: I took this picture at an angle due to the sun glare on the gauge cover, but in person you can see everything perfectly.
Here is a picture with the gauges off in direct sunlight.
As for the redline start point, the GSXR 1000 has a black face that ends at 15,000 RPM, the GSXR 750 has a white face, and ends at 17,000 RPM and goes every 2,000 RPM. The GSXR 600 goes to 18,000.
GSXR 750 gauges:
GSXR 1000 gauges:
I don't have a pic of GSXR 600 gauges.
Notice the needle is also different.
-Paul
Joined
·
2,514 Posts
Hey Paul thanks for a job well done they look sweet, I just got to remember not to stare at the guages to much when driving, lol.
Joined
·
1,100 Posts
Dayum, those are sexy.
Joined
·
2,514 Posts
Ahh...thanks. lol.detonator2 said:
Joined
·
2,514 Posts
:lolcolticus said:
unk
Joined
·
2,514 Posts
Heard that. I was worrying about the same thing then I found out that he only lived about 50 miles away, so I lucked out and he had them done in an hour.colticus said:
Joined
·
152 Posts
Well I emailed him several times a few weeks ago to set everything up so I could ship him my gauges. I even sent him a PM on this site. Took him a couple weeks to finally answer my PM and all he sent was a message asking if he had ever answered my emails. I ended up going through bluegauges.com I had the leds done in green and same with the LCD. I will try to post a pic of it tonight.
Joined
·
2,514 Posts
Yeah he recommended it that way because w/ the blue you can hardly see the redline, so he put a white led on that last partion. You can kind of see the bleed over from the white light at the top of the mph section. Still looks sweet imo.colticus said:
Joined
·
2,514 Posts
Twisted385 said:
Sorry to hear about that, I guess I lucked out on that too because I think I emailed him on thursday and he got back to me a couple of times and I ended up getting it done that following saturday. He might have been busy or out of town.
Joined
·
214 Posts
Does anyone know of a place where I can get a black face tach (an accurate one) like the one on the 1000?
Gilbmd01, did you do the led/conversion install yourself or did you ship your cluster to ledmods.net for the conversion? If you did it yourself how hard or easy was the install and do you have any pics? If anyone else did the work themselves feel free to chime in with input. Thanks
21 - 36 of 36 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
