Suzuki GSX-R Motorcycle Forums Gixxer.com banner

1 - 2 of 2 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
just installed a yellowbox on my 03 gsxr 1000, i recently went +2 from stock in the rear sprocket and i know the speedo is waaaaaay off. anyone have a calibration setting for this configuration? i'd like to avoid all the fun stuff with gps, hwy markers, etc.. etc... and just use a setting that has worked for someone else.

my gearing:
front= (stock)
rear= (+2)

thx in advance.

danny
 

·
Registered
Joined
·
886 Posts
My 03 1k was off by +7.5% from the factory. That seems to be the norm.

This is for a speedohealer. I dont know if the yellowbox is the same.
With your gearing and assuming the bike is off by +7.5%.

<font color="yellow">
SH Calibration Value to be stored: -12.2%
SH Conversion mode Value to be stored: 0

- the ignition must be OFF
- set ALL SH switches ON
- turn ON the ignition
- press the button => memory cleared

- set ALL switches OFF EXCEPT #4
- press the button 1 time(s)

- set #5 switch ON
- set #4 switch OFF
- press the button 2 time(s)

- set #6 switch ON
- set #5 switch OFF
- press the button 2 time(s)

- set #6 switch OFF => all data stored in Flash.
</font>

Does the yellow box come with any type of java calculator?
 
1 - 2 of 2 Posts
Top