[KJ1]

Just curious, I have a single sided swing arm on the way, I am going to modify it to bolt directly on to the oil cooled frame, wanted to know if any body would want it...
-Karl

[ 07-13-2002, 01:24 PM: Message edited by: KJ1 ]

 

[suzukiltd]

Re: Would anyone be interested ina single-side-swing arm for the 88-92 750, or 89-92 1100

Lets see some pics.

 

[Adrock]

Re: Would anyone be interested ina single-side-swing arm for the 88-92 750, or 89-92 1100

KJ1,

What swingarm are you using? I have seen
streetfighters done using a vfr 750 one, it meant
to be a fairly easy transplant (if you can look
past the honda parts). As always show us pics...

Adrock.

 

[KJ1]

Re: Would anyone be interested ina single-side-swing arm for the 88-92 750, or 89-92 1100

Give me about a week to get pics, I have a 996 swing arm on the way that I am going to use as my plat form...
-Karl

 

[FastCat]

Re: Would anyone be interested ina single-side-swing arm for the 88-92 750, or 89-92 1100

Karl: is that setup gonna be lighter, or heavier than the Stock Suzuki swingarm and wheel?

 

[suzukiltd]

Re: Would anyone be interested ina single-side-swing arm for the 88-92 750, or 89-92 1100

Are you trying to get rid of the Honda swingarm? What size is the rear wheel? Sounds like it will be a pretty sweet mod when your done.

 

[KJ1]

Re: Would anyone be interested ina single-side-swing arm for the 88-92 750, or 89-92 1100

errr...I don't have a Honda swing arm, I picked up a 996 swing arm for cheap minus the hub, I am not putting this on my bike, just going to use my frame as a reference point for setting it up for an oil-cooled gsxr, if it works out well I thought I would offer it up here first...I am on the look out for a Honda VFR swing as well to try it with that arm. I chose the Duc arm as it is shorter than the VFR arm...
FastCat the set up could be much lighter than a stock set up with the addtion of a Marchesini rear wheel, soemthing you don't want to do...as soon as the arem arrives I will weigh it and post up the specs on it...
-Karl

 

[suzukiltd]

Re: Would anyone be interested ina single-side-swing arm for the 88-92 750, or 89-92 1100

Ok, now I understand. My mind does not work well on Sundays