[Admin]

We would like to welcome Ride Scorpio as our newest supporting vendor!

Please take a moment to visit their site: http://ridescorpio.com/ride/

 

[2k6gsxr600]

Hi Everyone,

I am new to this forum and need help installing a Scorpio Ride system.
I have a K6 GSXR 600 and i recently installed the Scorpio Ride system and got it activated for most part. I am stuck with the Perimeter sensor not activating.
I suspect that my installation of the quick connector may be a concern here.

Ride Secure Kit has a quick connector pin (White wire) which needs to be connected to a switched source. I chose the brown wire (since its a Suzuki) in the tail section to connect but the sensor is not activating.

I would like to know if someone has installed this kit using a quick connector and where they chose to pin it? If someone can share the picture it will be great.

Here's how i connected (attached picture)