I have about half of a Canadian-spec '97 750 that I was going to use as the basis for a WSBK replica. The motor was originally built by Yoshimura in Japan as a hot-rod street motor and put out about 131 hp at the rear wheel. I don't recall what parts are in it, exactly. I bought it 15 years...
I have a bunch of SRAD 600 and 750 parts
6 assorted ecus
2 750 FI ecus, 20.00 ea
2 97-98 600 ecus, 10.00ea
1 99-2000 600 ecu, 10.00
1 96-97 750 ecu , 10.00
1, maybe 2 750 FI dashes, 25.00 ea
3 water pumps, 5.00 ea
1 complete clutch assembly, 10.00
6 assorted cams, 5.00 ea
2 750 FI intakes
Hi guys (and girls) pick up a 1997 750 the other day and found out that the gas tank was full of holes. Tried brazing tried welding but no luck. So I broke out the bondo metal patch seems to be holding for now. But I would much rather have a good tank under me.so if anyone has one please let me...
Looking for the following dry clutch parts. Part numbers straight out of the 96-99 factory racing parts catalog.These are mainly the center spacer parts for a dry main basket housing, hardware to secure it to the trans shaft, and the clutch push piece that sits behind the outer pressure disk...
Feeler.......Have a parts bike.
Maybe.....selling motor/rad/harness complete.
Aside from blinkers/ headlights
Motor appears fine (as in sounds great) oil change/fresh coolant. All electrical seams to work/charge.
MA. Cape Cod
Serious offers will warrant a...