Bit of advice if possible ?
Set my valve clearances on the 750J today and went about syncing the carbs afterwards.
Before sync and clearances I found the throttle response super crisp and it would come down the revs to idle super snappy but it wouldn’t idle.
If I adjusted the idle knob it...
Updated Parts Interchange: 88-92 750 and 89-92 1100
If you have something to add post a reply and I will add it to the List. I know with a lttle work ANYTHING can be adapted but this is more for the Direct swaps.
all 92-93 600, 88-95 750 and 89-98 1100 use the same bearings so the...
'90 GSX-R 750
Carbs are '90 stock Mikuni BST38SS with dynojet stage 3 jet kit. (I have drilled one lift hole larger on the slider and drilled main air jet, as listed on instructions)
Airfilters are K&N RU-2922, as listed on dynojet stage 3 jet kit. They have been washed and oiled.
Got some welding repairs to do to my subframe. One side has had a previous repair prior to my ownership but has cracked again. I also think my subframe is bent. The pics probably explain it better. Can anybody tell me if the subframe is a straight piece fo ally front to back or is the bend...