Hey Mark,
According to my Clymers Manual, 750 forks take SAE 10W fork oil and has a capacity of 462 ml (15.6 oz) for each fork tube. I'm not sure if the 1100 forks are the same or not.
Just rebuilt my '91 - 1100 forks. Redid everything. RaceTech Gold Valve and Race Tech springs. New seals, Bel-Ray fluid. A world of difference. Just log on to Race Tech and input your data and they give you recommended specs for springs, valving, and oil. It was kind of a bitch but email me if you go forward with I'll line you out, there are a few tricks you need to know. Good luck. Jesse e-mail : [email protected]
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.