Suzuki GSX-R Motorcycle Forums Gixxer.com banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
39 Posts
Discussion Starter #1
Alright I'm back to working on my 6/11, and have it to the point where the lights are working for the most part and I have it cranking. No spark.
I'm not surprised though as I don't have the oil pressure switch or the neutral switch connected to the harness. Kickstand switch has a hard bypass at the moment as that was already in the harness when I got it.
FYI, This is a 95 1100w motor with 1100 harness and ignitor.
I found some information already on ohming out the coils and measuring voltage at the ignitor etc., but for the life of me I cannot find the connection points in the harness for the oil pressure switch and the neutral switch. I'm sure I have to have the latter connected to get it to spark.
Is there a secret special place that these connect lol?
I'm hoping that someone might have their bike torn down enough to take a photo.
green with yellow and small female blade connector for the oil, and blue/red for the neutral with two prong small plastic connector.
Anyone?
Thanks,
Mark
 

·
Premium Member
Joined
·
39 Posts
Discussion Starter #2
OK, I've seen the folly of my ways for shelving this project for as long as I have. Turns out i'm trying to use an extra 600 harness I picked up. On the hunt for an 1100 harness now. Ebay is dry at the moment.
 
1 - 2 of 2 Posts
Top