Suzuki GSX-R Motorcycle Forums Gixxer.com banner

1 - 11 of 11 Posts

·
Premium Member
Joined
·
1,230 Posts
Discussion Starter #1
Listing everything on Ebay. In process of tearing bike down, cataloging parts, taking photos and listing. This may take a few weeks. A few items are currently listed on Ebay now. Search for Ebay user : floridabound2013 or rocket-garage. If your a member of GDC, message me there or here, I'll chk back here periodically.
Parts for sale, are everything, Frame (Clean 16k in my name) and Engine (16k) will also be sold. Lots of Carbon, Rare Marvic Magnesium Wheels, Rare Mikuni TMR Race Carbs, etc...- Cheers
 

·
Premium Member
Joined
·
1,230 Posts
Discussion Starter #3 (Edited)
Sorry for my delay in returning for a follow-up. Items have been slowly trickling onto Ebay under both accounts noted above. I'll try and frequent here more often so I don't leave anyone hangin'. I returned some PM's.

Listed thus Far:
CF Tank (SOLD)
Yoshimura Race Rack (NON-PRODUCTION) TMR Flatslide Mikuni 40mm Carbs MJN Kit w/ Magnesium throttle tube. (SOLD)
CF Frame covers
Carbon Hugger (SOLD)
Yoshimura CF Fender(SOLD)
Yoshimura CF Dash/ Meter cluster cover
Dyna 3ohm Mini Coils (SOLD)
V&H Power Pak (SOLD)
Yoshimura Custom Race exhaust (SOLD)
Y2K Carbon Solo Tail
Marvic Magnesium Stream line wheels w/ Tires, Cush & Aluminum Sprocket 530 (SOLD)
Brembo Full Floater Rotors (SOLD)
Galfer Rear lightened Rotor (SOLD)
Titanium Rotor Bolts Front & Rear (SOLD)
MRA Double Bubble windscreen (SOLD)
ZX7 Radiator w/ Twin Busa fans for GSXR 1100-750-600 (SOLD)
2 Pingel petcocks, 1 single outlet w/ reserve and adapter for GSXR, (SOLD) Other is dual outlet, no reserve needs adapter (SOLD).


Items to come:
Frame Polished Clean title
Engine complete w/ Alum Stator cover, Barnett Clutches and steels w/ HD Diaphragm springs, New OEM Clutch Master Cylinder, APE Cam chain tensioner, Degreed Cams, Perfect compression, FactoryPro Ign Advancer, FactoryPro Detent arm, Powder coated sprocket cover & Engine cover, 16k miles
52mm Forks, Black powder coated legs, Gold valves and .95kg Springs (180# rider w/ gear) Traxxion Dynamics did valving
Fox Twin Clicker rear shock ( revalve done by Traxxion Dynamics) Red powder coated spring (for #180 rider w/ gear) Lower link powder coated red
750 Braced swingarm, Powder coated Black
Dash cluster 16k
PP Tuning Adj Rear sets (03-05 GSXR1000) May fit others. Custom Frame mounts to fit the newer gen Rearsets. CF Heal guards
Vortex Billet upper triple (Machined to fit 52mm forks)
Vortex Clip-ons
Wire harness, Ignition, Few fairings, headlight, etc is last of the odds and ends...

Keep a look out on Ebay.
 

·
Registered
Joined
·
217 Posts
OOhh Myyy God....I need to hit the lottery like right now. Lol, really nice stuff man. I cant imagine what it took to get a hold of all that.
 

·
Premium Member
Joined
·
1,230 Posts
Discussion Starter #5
OOhh Myyy God....I need to hit the lottery like right now. Lol, really nice stuff man. I cant imagine what it took to get a hold of all that.
10+ years and allot of research. I lowered prices recently, Trying to move this stuff. Let me know what your interested in and hit me up.
- Cheers :cheers
 

·
Premium Member
Joined
·
1,230 Posts
Discussion Starter #7
You must not be looking on Ebay then. Lol.
On Ebay, search for sellers: "floridabound2013 and rocket-garage".
There is plenty listed and I've sold everything marked "SOLD" in the above list via Ebay.

Don't see anything on eBay and no pics or prices on here?
I haven't seen any interest here and the items for sale would be of interest to any serious collectors from around the globe, Ebay is the most suitable platform to advertise my items. Once upon a time, this GDC Watercooled group would have fought over these parts, not today, unfortunately...
 

·
Premium Member
Joined
·
1,230 Posts
Discussion Starter #8 (Edited)
Will have remaining pieces on Ebay this evening.
Look for them.

Short list:
Vortex 52mm Clip-ons (SOLD)
Vortex 50mm Upper triple Bored to fit 52mm Forks (They never made a 52mm Upper Triple) (SOLD)
Gauge Cluster (Missing Temp gauge and Aluminum Surround* Had CF Surround currently on Ebay)
52mm Forks (Powdercoated Black, Revalved w/ .95KG Springs and Gold valves) 3500 miles since rebuilt (SOLD)
Ignition Switch w/ 2 matching Keys (NO Gas Cap or Seat Lock)
Complete Engine * Less Carbs (Factory Alum Ign Cover, APE Cam tensioner, Degreed Cams, FP Ign Advancer, FP Detent Shifter mod, Barnett Clutch Pack, Barnett Clutch Springs, New 3k Miles Suzuki Clutch Slave, 530 -1 Counter sprocket, Powdercoated Sprocket cover) 16k documented miles
Complete Engine Harness (Modded for R1 Style Start/Stop Switch)
750 Braced Swingarm (Powdercoated Black w/ Hardware) (SOLD)
1994 Clean Title (Maryland) Frame (Polished Rails) 8k
Fox Twin Clicker rear shock (Last Serviced 3k Miles ago 200lb rider w/ gear *rated Spring) (Spring powdercoated Gloss Red, Lower Link Powdercoated gloss red) 3500 miles since rebuilt serviced (SOLD)
PP Tuning Adj Rear Sets (03-05 GSX-R 1000)
Custom Frame Rear-set brackets to use above rearsets, any aftermarket sets for that chassis (600,750,1000 etc) * Made from MIL Spec Aluminum
ZX-14 Clutch Master (SOLD)
S/S Braided Clutch line
S/S Rear Brake line
17mm Pre-load adjusters Blue
DID ERV 530 Gold Chain, Used
Rear Pass Pegs w/ Brackets Powdercoated Black Lockhart Slashcut pegs
Yoshimura digital Multi meter w/ WC Temp sender
Chrome Kickstand and bracket complete
Taylor 8mm Red plug wire set
Headlight assembly (Glass) W/ Upper fairing and headlight stay. (SOLD)
Upper fairing stay * Chrome plated (SOLD)
Speedo Unit w/ Cable
 

·
Premium Member
Joined
·
1,230 Posts
Discussion Starter #9
Sorry for my delay in returning for a follow-up. Items have been slowly trickling onto Ebay under both accounts noted above. I'll try and frequent here more often so I don't leave anyone hangin'. I returned some PM's.

Listed thus Far:
CF Tank (SOLD)
Yoshimura Race Rack (NON-PRODUCTION) TMR Flatslide Mikuni 40mm Carbs MJN Kit w/ Magnesium throttle tube. (SOLD)
CF Frame covers (SOLD)
Carbon Hugger (SOLD)
Yoshimura CF Fender(SOLD)
Yoshimura CF Dash/ Meter cluster cover
Dyna 3ohm Mini Coils (SOLD)
V&H Power Pak (SOLD)
Yoshimura Custom Race exhaust (SOLD)
Y2K Carbon Solo Tail (SOLD)
Marvic Magnesium Stream line wheels w/ Tires, Cush & Aluminum Sprocket 530 (SOLD)
Brembo Full Floater Rotors (SOLD)
Galfer Rear lightened Rotor (SOLD)
Titanium Rotor Bolts Front & Rear (SOLD)
MRA Double Bubble windscreen (SOLD)
ZX7 Radiator w/ Twin Busa fans for GSXR 1100-750-600 (SOLD)
2 Pingel petcocks, 1 single outlet w/ reserve and adapter for GSXR, (SOLD) Other is dual outlet, no reserve needs adapter (SOLD).


Items to come:
Frame Polished Clean title
Engine complete w/ Alum Stator cover, Barnett Clutches and steels w/ HD Diaphragm springs, New OEM Clutch Master Cylinder, APE Cam chain tensioner, Degreed Cams, Perfect compression, FactoryPro Ign Advancer, FactoryPro Detent arm, Powder coated sprocket cover & Engine cover, 16k miles
52mm Forks, Black powder coated legs, Gold valves and .95kg Springs (180# rider w/ gear) Traxxion Dynamics did valving (SOLD)
Fox Twin Clicker rear shock ( revalve done by Traxxion Dynamics) Red powder coated spring (for #180 rider w/ gear) Lower link powder coated red (SOLD)
750 Braced swingarm, Powder coated Black (SOLD)
Dash cluster 16k
PP Tuning Adj Rear sets (03-05 GSXR1000) May fit others. Custom Frame mounts to fit the newer gen Rearsets. CF Heal guards
Vortex Billet upper triple (Machined to fit 52mm forks) (SOLD)
Vortex Clip-ons (SOLD)
Wire harness, Ignition, Few fairings, headlight, etc is last of the odds and ends...

Keep a look out on Ebay.
Edited
 
1 - 11 of 11 Posts
Top