Looking for chassis spec sheets for both models. Rake, trail,offset etc.
Or if you know who may have them.Thanks
Or if you know who may have them.Thanks
need 90-92 gsxr 750-1100 chassis specs
Join the discussion
Recommended Reading
-
Suzuki GSXR 1100H 1987 Rebuild
Oil Cooled GixxersHi going to run a thread on my rebuild here. Its going to be a slow burner so figured Id group it all in a common thread.- 32
- 1K
-
kiwisuzuki1100 · updated
-
B12 engine build
Oil Cooled Gixxerslooking to acquire a 1st-gen B12 engine and already have plans to turn it into a monster. Here's what I have in mind: Hayabusa pistons and rods, it'll punch out the motor to a 1216cc while being stronger too. I've read that 81mm is the max you can bore the OEM sleeves to before needing new...- 8
- 250
-
Gixxerider86 · updated
-
Spark Plug Wire Replacement
Oil Cooled GixxersI've been reading around and haven't been able to find super clear information on this - is it possible to replace the plug wires for these coils, or do the entire coils need to be replaced? I was taking off the head to check valve clearance and one of the boots pulled off the wire. I know I can...- 12
- 236
-
grip comp, rear 1985 GSXR750
Oil Cooled GixxersHi everyone, I am rebuilding a first gen gsxr750 1985 model and am having trouble working out how the grip comp, rear p# 43980-27A01 fits. I have worked out that it fits on the outside of the rear section of the rear guard but i can not work out how the front of the grip fit , does it bolt on to...- 2
- 128
-
Reviving a '91 GSXR750
Oil Cooled GixxersBack in January, I bought a 750M in non-running condition as a project. It's been a slow process, first because of the long cold winter (my shop is not heated) and I've also had a few other ongoing projects get in the way. The PO mentioned that the emulsion tubes were ovaled so the carbs would...- 25
- 1K
-
twerth · updated
Join now to ask and comment!