Joined
·
8 Posts
Picked up this clean low miles 07 1000 from a buddy of mine. Think what I should do to it mod it or leave it alone.
![Tire Wheel Fuel tank Automotive tire Motor vehicle]()
My 07 1000
1 - 13 of 13 Posts
Joined
·
8 Posts
Bike came as is, Lowered a bit from the forks and strap as well. Does have some lowing links. But I decide to mod it I will take forks off get them cut and maybe a full system, and swimgarm and sprockets and a tune.
Joined
·
8 Posts
Yes bike almost new with 10k on the dash. Paint very good does have one small scratch but not to noticeable.. Not sure if I wanna mess with it or not lolLooks brand new ! wow ! Yeah looks lowered (strapped down) in front.
Exhaust and that's it.
Joined
·
8 Posts
Bike came like that! Belong to a good friend of mine all it has is a slip on, and lowered a bit
"all it has is a slip on"
I'm guessing that the catalytic convertor has been removed as part of that. Yoshimura was nearly put into bankruptcy for selling such systems. The levers and grips have also been changed, at least on the left side. "lowered a bit" is a misstatement. The strap and raising the forks in the clamps looks like it's lowered as much as possible. Removing the front rotor (and presumably a front caliper) makes it unfit for street use. Yet it strangely seems to have the passenger footrests. Has the ECM been flashed? I'm wondering if it once had swingarm extension blocks. "take forks off get them cut and maybe a full system, and swimgarm and sprockets and a tune" implies that you're going to use it as a race only bike. Is that right?
I'm guessing that the catalytic convertor has been removed as part of that. Yoshimura was nearly put into bankruptcy for selling such systems. The levers and grips have also been changed, at least on the left side. "lowered a bit" is a misstatement. The strap and raising the forks in the clamps looks like it's lowered as much as possible. Removing the front rotor (and presumably a front caliper) makes it unfit for street use. Yet it strangely seems to have the passenger footrests. Has the ECM been flashed? I'm wondering if it once had swingarm extension blocks. "take forks off get them cut and maybe a full system, and swimgarm and sprockets and a tune" implies that you're going to use it as a race only bike. Is that right?
Joined
·
8 Posts
Catalytic converter still on bike but came with a slip on,I order some OEM grips and levers cause the ones it has I don’t like. Straps I took them off already cause I will be taking forks off to send them to get cut! But bike brakes good with one Rotor no problems braking here.ECU hasn’t been touched did order a full system Alien Head for it and got some BST wheels for it as well not sure if I wanna make it a Drag bike or Jusy street bike. Since I already have 3 drag bikes 2 Hayabusa and a 2017 10000
Joined
·
8 Posts
Yeah if has the slip-on, I'd leave it just like that.
1 - 13 of 13 Posts
