Suzuki GSX-R Motorcycle Forums Gixxer.com banner
1 - 5 of 5 Posts

· Registered
Joined
·
104 Posts
Discussion Starter · #1 ·
Thanks again for the replies on my other post.
My motor is completely apart and any internal mods need to be done now. Has anyone used after market rods,cams or pistons? any opinions appreciated.my head has already been lightly ported if that helps.This will be a open practice /track day bike only!
 

· Registered
Joined
·
378 Posts
There's a lot of great aftermarket stuff available.

I've run several sets of JE pistons with complete satisfaction (wouldn't use anything else) and have also had good luck with WebCam camshafts http://www.webcaminc.com/suzukimoto.html

I don't have a link for JE pistons but you can get them here http://www.dragbike.com/carolinacycle/index.htm along with some of the best service and machine work in the Southeast- ask for James, he's there Mon-Wed-Fri, tell him I was braggin' on him again.

Ed Henderson

.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top