Removed from a street/display bike with less than 900 miles after it was powder coated / installed.
Used arm is in "as new" shape with one small mark on the right side from a cotter pin in the rear brake reservoir.
Adjusters and stand hangers are in very good shape with some small marks on the adjusters.
$1,800 plus $100 ship in lower 48.
All other locations contact me for ship cost.
All other locations contact me for ship cost.
![Hood Bumper Office supplies Automotive exterior Composite material]()
![Electric blue Bicycle part Fashion accessory Transparency Font]()
![Gas Bumper Bag Metal Auto part]()
![Composite material Bicycle part Metal Auto part Natural material]()
Used arm is in "as new" shape with one small mark on the right side from a cotter pin in the rear brake reservoir.
Adjusters and stand hangers are in very good shape with some small marks on the adjusters.
- From centerline of pivot to rear of axle adjuster hole approx. 24.5" / stock 23.5"
- Stripped weight approx 12.3lbs / stock 15lbs.
$1,800 plus $100 ship in lower 48.
All other locations contact me for ship cost.
All other locations contact me for ship cost.
