[riggaj]

I'm nearly done jetting my bike (92 750) and have a few questions about the idle. When you start your bike with the choke, how many RPM's is it running? Does it increase as it warms up? What about your fast idle? I've been starting it up with the fast idle and then drop it down to the choke, and then push it in altogether. This all happens fairly quickly and I'm concerned it's a bit rich. What do you guys think, lean out the fuel screw or drop the float level?

What is the idle supposed to be set at? 1000rpms?

 

[kan3]

1200rpm is stock idle setting

 

[riggaj]

Good to know, I had mine set at 1000

 

[outlanderlet]

i use half choke to start the bike but aparently im sunning my idle to high as im at 1500 but as soon as the pitch changes i kill the choke and let it warm up on its own for about 2 minutes and im streight

BTW what jets are you using i need to jet mine soon to get my power back or do a dino pull to make sure i need to

sometimes i hate not knowing what im doing with my carbs :hammer