Joined
·
23 Posts
How can I clear a C00 code ?
Thanks
Thanks
How do you clear codes ?
1 - 10 of 10 Posts
Joined
·
16,149 Posts
You don't and it is not a code. Codes will clear when you turn off the ignition.
Joined
·
23 Posts
The code I am seeing is _C00 What does this mean? How do I clear or reset ?
Joined
·
16,149 Posts
Your TPS is out of adjustment, the dash should be in the middle -C00 and you cannot clear it. It will always be there when you put the bike in dealer mode unless there is an FI malfunction code.
Joined
·
961 Posts
C## is the format.
C00 (zero zero) = no error. This is the default code every time you're in dealer mode if no error is present.
If your FI light comes on, it will be cleared once you turn the bike off via key. As long as the bike stays on, code won't clear.
For example. FI light comes on while bike is on and engine running. You kill the engine via kill switch and flip it back on. Access dealerod and the code will still be there because you didn't turn off the bike, you only killed the engine.
The "-" before the C## is the TPS indicator. Adjust it so it sits in the middle for stock settings or at the point it moves from middle to top for performance.
Also .. Search . more likely than not, your question has already been ask.
Cheers
C00 (zero zero) = no error. This is the default code every time you're in dealer mode if no error is present.
If your FI light comes on, it will be cleared once you turn the bike off via key. As long as the bike stays on, code won't clear.
For example. FI light comes on while bike is on and engine running. You kill the engine via kill switch and flip it back on. Access dealerod and the code will still be there because you didn't turn off the bike, you only killed the engine.
The "-" before the C## is the TPS indicator. Adjust it so it sits in the middle for stock settings or at the point it moves from middle to top for performance.
Also .. Search . more likely than not, your question has already been ask.
Cheers
Joined
·
23 Posts
Thanks for the Info. Now,I know what to correct.
Joined
·
1 Posts
How can i get error codes
^Buy a dealer mode switch and put the bike into dealer mode. See your service manual for more info. There are a couple different switches depending on what your bike uses. The switch can be purchased from Suzuki or from sources like ebay.
Joined
·
1 Posts
uno i am having the same problem with my 2004 600.the fi light came on ,on the freeway and now it willl not go off,however the bike runs some what ok...crazy i have a c28 code but i cant get the code to clear or light to go off,what do ii try todo any help would be apprciated 1fastone33
2nd how or whats the step by step to adjusting the secondary throthle accuator switch ...anyone help me thanks
^See the service manual. C28 is the secondary actuator and pages 4-45 to 4-46 of the manual show how to check it. The first step is to check the connector between it and the main harness. You also might have a failing contact at the ECM. "some what" is probably right as you're probably in limp home mode. I don't know what the secondary actuator switch is.
1 - 10 of 10 Posts
