Suzuki GSX-R Motorcycle Forums Gixxer.com banner
1 - 5 of 5 Posts

·
Registered
Joined
·
144 Posts
Discussion Starter · #1 ·
i have an 86 11 and just picked up a 93 complete front end. can i use the old bearings (will they fit) and how do i get the one off the bottom of the triples (on the 86). it seems like it is pressed on or something.
 

·
Banned
Joined
·
3,509 Posts
If the RACES for the bearings are clean and usable then you don't need to replace them. You SHOULD replace the BEARINGS when you do the swap. and use grease
 

·
Registered
Joined
·
434 Posts
an air chisle against the edge of the lower bearing and you can drive it off, also be careful of the lower dust sheild you want to save it to reuse it they are expensive.
 

·
YAAFM Mod
Joined
·
3,016 Posts
Any Machine Shop can pull it for you. If you have the new one ready they won't charge much to Remove the old and Press on the new one. They charged me 15.00 last time I had it done.
Bones
 
1 - 5 of 5 Posts
Top