OK Guys, I hav the 01 1K and have a undertail. As many know, when you install a undertail the cowl want fit flush any more, or at least that's been the case with mines and a few others I know. Heard a few ideas to correct this issue on the board, , and I choose the one of shaving the rubber spacers that hold the rear plastic under the rear seat. My issue is now the Cowl moves around a lot will riding because it is not tight. I am afraid of the well known "Flying Cowl " so I wanted to see if I could get any other suggestions to make the cowl seat flush, but fit properly at the same time. Thanks in advance for any suggestions.