Suzuki GSX-R Motorcycle Forums Gixxer.com banner
1 - 6 of 6 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
Are there any free mods for a 1998 GSXR 750? I have a 2002 GSXR 750, and there is the pair mod, and the throttle body secondary butterflies and some other little stuff. My neighbor just bought the 98, and we were wondering what we can do for free or cheap.
 

·
Registered
Joined
·
1,914 Posts
i'd go for the pair removal

the airbox mod is good and sealing the intake joints

exhaust mod to get a little more sound, and keep the std system

play about at raising the rear or dropping the forks slightly

tre is dirt cheap (home made one) and works for some

braided hoses on the front, HH pads

ignition advancer dont sound bad

i want a power commander but a remap of the std box makes a difference

its all fun and games !!

dan
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #3 ·
what is the airbox mod? and which joints do you seal? keep in mind, i haven't dealt with the 99-99
much at all. and what is the exhaust mod?
 

·
Registered
Joined
·
55 Posts
I am not sure about the exhaust mod myself, but here is a link to the airbox mhttp://www.gixxer.com/cgi-bin/ultimatebb.cgi?ubb=print_topic&t=000026&f=26od
 

·
Banned
Joined
·
6,048 Posts
i think dan was referring to either a slip on pipe, or a full system. The seals need to be made around the ram inlets (airbox side) union to the frame...
 
1 - 6 of 6 Posts
Top