Suzuki GSX-R Motorcycle Forums Gixxer.com banner
1 - 20 of 20 Posts

·
Registered
Joined
·
136 Posts
Diddo on Home Depot! under $5... I made my own, and it turned out great.
Get yourself some aluminum stock, cut it to size you want, bend it to whatever angle you want to display your plate, drill some holes and bolt it up with the hardware from the old 'mudflap'. Wallah, there's your hard to find eliminator. You can even paint it if you want to. Good luck:cheers
 

·
Registered
Joined
·
237 Posts
Just get some 1 1/2" corner brackets from home depot, You only need 2 and they cost $1.89 for 5. Paint the brackets black, drill new holes on the license plate and your done. No cutting of the stock mudflap or anything like that. It looks good too.
 

·
Ditchard the High Maintenance Squirrel
Joined
·
60,366 Posts
600 kit came from Bikelitz

1000 kit came from Hotbodies

Both are good.

Google can be your friend.
 

·
Registered
Joined
·
187 Posts
Is there anyone that removed it that is looking to get ride of it (if you haven't thrown it away)? I just picked up an 06 600 and need one for inspection. They're tough here in Delaware lately...

Also, does anyone know if one from an 06 1000 will fit an 06 600?
 

·
Registered
Joined
·
153 Posts
Evotech Fender eliminator. Look on ebay for them... they make the best looking on imo
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top