Suzuki GSX-R Motorcycle Forums Gixxer.com banner

Status
Not open for further replies.
1 - 20 of 21 Posts

·
Banned
Joined
·
3,509 Posts
Discussion Starter #1
I hope this is the last time I have to update the contest...It should be done on the 24th. So if you want a shot at a FREE dyno run time's-a-wasting.
I could have really had fun adding the torque number into the guessing but maybe I'll save that for some other time.
What to give as a prize? How about a dyno run? I got two "Free Dyno Run" coupons with my jet kit...and I really only need one.

So here are the "rules"...

1) The Gixxer.com member that guesses the closest, without going over, the Dyno measured Rear Wheel Horsepower (RWHP) will win a coupon issued by K&N Engineering,Inc. valid for one free Dyno run (US only per the coupon, you Canadians will have to smuggle it across the border)

2) One guess per member, no editing of posts.

3) Guesses will be in increments of 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, for example...1.3 rwhp, 1.5 rwhp, 2.0 rwhp.

Guesses of increments without a decimal will NOT be accepted.

Determination of actual measurement will be determined by the wife of Simon Orttan...she's the closest person to being truely impartial I can find.

4) Coupon will be mailed via US Postal Service.

5) Deadline for "contest" is "when I get it Dyno'd"...or hopefully no later than the 4th of May 2002.

6) THIS IS SUPPOSED TO BE FOR FUN, NOT PROFIT, SO NO WHINING!!!! AGAIN, I SAY THIS IS FOR FUN!!!

And here is the list of modifications...

Stock 1986 GSX-R 750 RG motor with 25,000 miles. Which last made roughly 85rwhp stock with the Hindle/31mm carbs.

Resleeved to 907cc by APE.

907cc pistons by JE.

1992 GSX-R 750 valve head with STOCK cam with valve job and minor machining performed by Suter's Speed Shop.

Titanium valve spring retainers by APE.
1992 GSX-R 750 carbs...38mm with K&N jet kit #19-3135 and individual K&N filters

Dyna 2000 (DDK3-3) ignition, coils (DC4-1) and plug wire set (DW-800)

Hindle Supersport stainless steel exhaust.

Let the guessing begin

Here's what I have so far 13May2002.

98.2 Skidmark (no faith in me?)
105.5 Budyee
106.9 NotoriousRev
107.5 Hotrod
108.2 Tornado-rider
108.4 OilCooler92
108.7 Fun2Fly
109.3 mdpgsxr1000
109.8 Jim,northern,va
111.1 Keisuke
111.2 Gdsaxnr
111.9 Andy James
112.4 Fast Sidecar
112.7 Gt95stangaf
112.8 Ironclad
113.1 Wormser77
113.6 Magixxxstic
114.0 The Hun
114.1 Justinsrad98
114.2 dinoracer
114.6 Horizon
115.1 Diancok
115.3 Jon - no'h'
115.4 Barn
115.6 Scott
115.9 Fastcat
116.0 azgsxr11
116.2 JP233
116.8 Klipsch_gixxer
117.7 88/750
117.8 Jeff56
117.9 Bones_GSXR
118.3 Paco1000
118.6 Crazy2wheeler
118.8 KJ1
119.0 1qwik6
119.1 gixxer2nv
119.3 The Fast One
119.7 GSXR1255Jimmy
119.8 Superbikegsxr6
120.0 Doug
120.1 GixxerRacer371
121.3 Lang
121.6 Ron Ayers Motorsports
121.7 96gsxr1100
122.2 Poorboy
122.6 93Gixxer-6/7
122.8 Zeos
123.0 Ragnar
123.4 mtmra70
124.3 Adrock
124.5 -=baal=-
124.6 Tony
126.4 TBass
128.4 Gixxerific
128.9 Gixxerpower
131.3 Prozac
132.7 Suzukiltd (you are such a suck-up [[thumbup]] )

The following have posted nubers that were already taken...
Audi1031
newgixxerrider
Barneys black 1k
U know U Luv it 2
Josh Pico
Zt's gixxer
Young Gixxer

[ 05-31-2002, 08:22 PM: Message edited by: Simon Orttan ]
 

·
Registered
Joined
·
461 Posts
I would guess, but I haven't been here for a while, so I don't have any clue what mods you have made to what motor.
 

·
Registered
Joined
·
461 Posts
Originally posted by karl_1052:
I would guess, but I haven't been here for a while, so I don't have any clue what mods you have made to what motor.
<font size="2" face="Verdana, Arial">116.9hp with 62.5lbs ft of torque

BTW, if I win, I do not need the dyno coupon, just pass it on to the next guy.
 

·
Super Moderator
Joined
·
17,291 Posts
Count me in......110.5
 

·
Banned
Joined
·
3,509 Posts
Discussion Starter #11
Numbers to be posted Friday the 24th...now that I have to take the head off (for the 3rd time) and get the "air injection ports" plugged.

What a cruel joke this has turned out to be.
 
G

·
Guest
Joined
·
0 Posts
I got a Cali head on my 93 Water cooled GSXR.... I had to buy some block-off plates from the intuitive frame slider people.
 

·
Registered
Joined
·
68 Posts
99.9
i am sure i am not going to win with that.... but i have learned something from bob barker. It's always the person who bids $2.00 who wins the brand new sports car.
 

·
Registered
Joined
·
7,958 Posts
Damn you Mr Orttan, this is just a way of stringing us suckers along
 

·
Registered
Joined
·
1,103 Posts
and today is the 27th.

come on when do I win ?

.........or was it really that bad that you don't want to talk about it?


Andy
 

·
Banned
Joined
·
3,509 Posts
Discussion Starter #17
Originally posted by Andy James:
and today is the 27th.

come on when do I win ?

.........or was it really that bad that you don't want to talk about it?


Andy
<font size="2" face="Verdana, Arial">I was sitting in the corner with my pint trying to go unnoticed
I went by Friday afternoon to pick it up and they had just started working on it. The mechanic scheduled to do it was sick for two days and the other mechanics had to share his workload to try to get repairs done. The felt that I was easy going and not in a hurry as the gixxer was "obviously a race bike and the races aren't until the 7th of June"
fuckers. It was nice this weekend too. fuckers. They said it would be Tuesday or Wednesday. fuckers didn't even call me about the delay.

So......results of the dyno to posted some time in my lifetime. or not.
 

·
Registered
Joined
·
1,103 Posts
sorry to hear that you are getting messed about. It happens way too often because as a rule people don't complain enough, me included.


The only way to get something done is to trust it to someone you know and trust or to do it yourself.

look out for more excuses, i hope that the work doesn't end up rushed though.


Andy
 
1 - 20 of 21 Posts
Status
Not open for further replies.
Top