craigslist Vancouver B.C.
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
1988 GSXR Carb Sync Issues
Oil Cooled GixxersBit of advice if possible ? Set my valve clearances on the 750J today and went about syncing the carbs afterwards. Before sync and clearances I found the throttle response super crisp and it would come down the revs to idle super snappy but it wouldn’t idle. If I adjusted the idle knob it...- 22
- 273
-
88-92 750 and 89-92 1100 Parts Interchange Info
Oil Cooled GixxersUpdated Parts Interchange: 88-92 750 and 89-92 1100 If you have something to add post a reply and I will add it to the List. I know with a lttle work ANYTHING can be adapted but this is more for the Direct swaps. Forks: all 92-93 600, 88-95 750 and 89-98 1100 use the same bearings so the...- 159
- 170K
-
Bones_GSXR · updated
-
'90 GSXR 750 loss of power
Oil Cooled Gixxers'90 GSX-R 750 Carbs are '90 stock Mikuni BST38SS with dynojet stage 3 jet kit. (I have drilled one lift hole larger on the slider and drilled main air jet, as listed on instructions) Airfilters are K&N RU-2922, as listed on dynojet stage 3 jet kit. They have been washed and oiled. Exhaust is...- 5
- 128
-
Baronn · updated
-
Suzuki GSXR 1100H 1987 Rebuild
Oil Cooled GixxersHi going to run a thread on my rebuild here. Its going to be a slow burner so figured Id group it all in a common thread.- 27
- 1K
-
kiwisuzuki1100 · updated
-
GSX-R750F Sub Frame
Oil Cooled GixxersHi, Got some welding repairs to do to my subframe. One side has had a previous repair prior to my ownership but has cracked again. I also think my subframe is bent. The pics probably explain it better. Can anybody tell me if the subframe is a straight piece fo ally front to back or is the bend...- 3
- 49
Join now to ask and comment!