Suzuki GSX-R Motorcycle Forums Gixxer.com banner
1 - 9 of 9 Posts

·
Banned
Joined
·
15,031 Posts
EBC HH sinitered no complaints from me or the many friends that race with them

add galfer steel lines and your set
 

·
Registered
Joined
·
37 Posts
I have the same question as the original poster.

I read on another board EBC HH pads groove the rotors bad and don't work well in the wet. But I've never tried them myself.

I've read quite a few people on these boards love Vesrah. Can you say why? (great cold, don't fade when hot, good wet, don't chew rotors, dirt cheap, last forever, whatever you can think of). Feel free to point me at another site or thread if this has all been covered before.

Thanks!
 

·
Registered
Joined
·
292 Posts
Galfer 1396's worked real well for me wet or dry...
Now having said that I'm trying out the new Ferodo
XR's on my new Axis iron rotors today...
Was real happy with the Galfers though but now I'm lookin for more...
 

·
Registered
Joined
·
4,405 Posts
I have the same question as the original poster.

I read on another board EBC HH pads groove the rotors bad and don't work well in the wet. But I've never tried them myself.

I've read quite a few people on these boards love Vesrah. Can you say why? (great cold, don't fade when hot, good wet, don't chew rotors, dirt cheap, last forever, whatever you can think of). Feel free to point me at another site or thread if this has all been covered before.

Thanks!
about the Ves everything you said is correct except NOT CHEAP
PF95's are cheaper and almost as good
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top