[2wheelbandit]

Hey guys my horn is shot so i bought some new ones. There realy loud, they come in a pair, ones a high, ones a low. Anyways jus wonderin how i should wire em, One wire from the battery, one from the horn button? The relay comes with it, but the wirng diagram looks like chinese to me! Theres 2 diagrams, one says "wiring diagram for cars/bikes with ground lead to horn button" and the other says "wiring diagram for cars/bikes with hot lead to horn"
which diagram should i be lookin at?
Thanx for the help

 

[OilCooler92]

You should have a negative horn switch on your bike. Does the relay that came with the horns have #s on the bottom where the pins are?

If so connect #85 to The battery with a 15 amp fuse in line close to the battery.

#86 to the horn switch wire that doesn't light a test light when the ignition is on. If both wires light the light then press the horn button and see which wire loses power and connect it to #86.

connect #30 to the wire conncted to #85.

connect #87 to the + side of the new horns

connect the - side of the new horns to the - side of the battery.

Make sure that all connections are insulated. If you can see wire strands when you are done, cover them with electrical tape

I hope that this helps.
-Dave