Looking for some help.
With the engine off, ignition off, bike in gear, clutch lever pulled in, the bike wont roll. Its like it is locked in gear - zero movement on rear tire even with prybar.
I have pulled apart the clutch and rebuild it...no change
The clutch basket had some wear but nothing...
my r/h steering stop fell off today 85 GSXR750. it was cracked and just gave up the ghost. Whats the best way to repair? I could put a nylon stop on the frame, concerned welding might do more damage than good?
setting my pilot screws and noted they were wound out quite a bit. Seems to be some discrepancy around what the right number of turns are?
1/2 or 1 1/2 turns? also the factory setting says 1/2 turn back? does this mean wind screws out fully then turn back 1/2 or wind in fully and 1/2 out?