Suzuki GSX-R Motorcycle Forums Gixxer.com banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
1,660 Posts
How did you get 115hp at the rear wheel on a 600. My 600 with a Yosh pipe and K & N filter only dyno'd at 92.5hp. What mods do you have? The 750 engine is a direct bolt in if you use a '96-'99 750 engine. You will also need the wiring harness, coils, and cdi. Do a search in this forum cause it has been covered numerous times.

By the way, welcome to GDC.

gixxerman
 

·
Registered
Joined
·
970 Posts
I have a 98 Srad 600 and its pushing 115hp at the wheels with 66ftlbs of torque I was wondering if I could swap a 750 in its place?
Bullshit, and you only have 1 rear wheel.

Even a 750 doesn't make 66 ft-lbs of torque without a big bore kit. If you break 60 with a pipe on a 750 that would be damn good.

46 ft-lbs would be pretty good for a 600.

NOS or a wet dream?
 

·
Premium Member
Joined
·
1,166 Posts
Wow...am running a 99 srad600 with full uk 600 race spec. engine and that is pushing 108 bhp and 49.2 ft/lbs at rearwheel.

How'd you get that much horsepower out of yours?



Dave
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top