[CRSandelli]

Hi all,

I searched around and found plenty of topics on this. But I am at a juncture where I don’t want to break anything.

I have the cluster out of the way and the dust cap off the back of the parking light. That leads to a Gray and Green wire that seem to butt up to the back of the parking light bulb.

But, I am wondering do I just pull on the wires/soft connector to get the bulb out? Or is it a twist and pull type scenario?

Just don't want to break anything!

 

[CRSandelli]

Well, luckily I found a YouTube video just now. Appears you just pull and it pops out as shown in this video.

 

[CRSandelli]

For anyone curious - here’s what it looks like out.

Sensitive content, not recommended for those under 18

Show Content