My K5 1000 clutch was dragging in 1st gear on take off. Not had the chance or time to do clutch mod but I adjusted the three lifter pins. Rather than 2.25 turns out I tried coming in half a turn at a time until the 1st gear dragging stopped. 1.5 turns out and the dragging's gone. Clutch aint slipping.
05/06 Gsxr 1000 Clutch Mod DIY w/ lots of Pics
Here is my DIY contribution this great site. This is the clutch mod that has been discussed in the past. Thanks to Stocky for his contributions and others.
I have the PDF also for anyone interested to download here is the link Below. 56k users this is your best OPTION. Also if it expires pm me with your email and i will send it out.
http://www.savefile.com/files/636359
Enjoy!
-Ali-:cheers
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
I have the PDF also for anyone interested to download here is the link Below. 56k users this is your best OPTION. Also if it expires pm me with your email and i will send it out.
http://www.savefile.com/files/636359
Enjoy!
-Ali-:cheers
19
