Suzuki GSX-R Motorcycle Forums Gixxer.com banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. SRADs (97-00 600 and 96-99 750)
    Hi all, Picked up a 2000 plate blue and white srad 600 for restoration which has come with pepsi fairings but i want to put it back to original but there are that many variants of the blue and white so trying to see exactly which ones were the 2000 colours to get as close as possible, So can i...
  2. SRADs (97-00 600 and 96-99 750)
    Hey everyone, ran into a lil issue here going over the last lil bit of my carbs.. One of the small screws holding the throttle blade on to the linkage seems stripped. It keeps turning right; seemingly not tightening whatsoever. My worry is that over time from engine/road vibrations; it will work...
  3. SRADs (97-00 600 and 96-99 750)
    Long time lurker, first time posting.. So I'm in the process of rebuilding the carbs for a 97' 750 project I've been working on; during that process I've been battling with them the entire time. From stripping carb cap screws to the float screws and even jets, it's been a b*tch. The problem I'm...
  4. SRADs (97-00 600 and 96-99 750)
    Hi! I have a problem that seems to be unique, haven’t found an answer so far. When I turn the ignition to on, fuel pump starts making its noise (and the bike starts up), but then it doesn’t stop with the relay click. It just keeps priming(?) and doesn’t shut off until I switch the whole bike...
  5. SRADs (97-00 600 and 96-99 750)
    Hi all... Had a headache with a set of carbs somebody been tampering before i got bike as project, Had to order 2 new slides as Tabs broken and glued, whole new body on number 1 due to snapped/missing emulsion tube, when bike was running was extremely rich on 3 cyls, splutters badly mid range...
  6. Pics and Vids
    On my way to my brother's in Finland. The spring is late this year.
  7. SRADs (97-00 600 and 96-99 750)
    Hey! Bike is a 1996 750 SRAD, 55000 km. Earlier this year it slowly began to run poor (one or two cylinders were clearly not giving everything, confirmed by plug color on cylinder 4). After I lifted the tank I saw that some sparks were jumping from the cables to the engine and one carb was...
  8. 05-06 GSX-R1000
    Hi guys. My name is Ricardo, I'm Brazilian. I bought a Srad 2005 1000cc, however it is without the ECU and the Whip. Could you help me on which ECU model would be compatible with my bike please? Chassis number: 9cdbl111j5m000783 Thank you very much in advance.
  9. SRADs (97-00 600 and 96-99 750)
    Hi all, New member here, coming in with a question. I am looking for a rear shock swap on my 1996 SRAD 750. I was thinking about trying the S1000RR 2015 - 2018 model, as it is only 3mm shorter but stiffer (I'm heavy, I did the same on my GSX-R750 1991, which worked very well for me). Does...
  10. SRADs (97-00 600 and 96-99 750)
    This is extremely niche, but as SRADs become more of a collectors item, hopefully this will help someone out at some point... There are 4 rubber grommets which attach the headlight to the speedometer bracket; 2 on the back of the headlight housing and 2 on the bottom. As they dry rot and break...
  11. GSX-R600/GSX-R750 General forum
    Hi Guys, I am wondering whether this is right or wrong, there's very mixed views online about this. I believe the power to the rear wheel to be 92bhp as stated on several sites and wikipedia for my 1998 model GSXR 600 SRAD. Meaning its within limit for restriction (94bhp max) A2 bikes.com also...
  12. SRADs (97-00 600 and 96-99 750)
    Hi there, recently bought a 97 600 SRAD. The bikes very clean and doesnt really have any issues except one niggly thing. The guy I got it from says he kept it at 6000 revs as if it was below that it would bog down if trying to give it a good bit of throttle. I tried to find other similar posts...
  13. SRADs (97-00 600 and 96-99 750)
    hey all, 14k miles, just got her a couple days ago. Problem with longer idles. It needs 1/2 throttle to start. The choke does not have any use (even in cold) it just stalls it (which makes me think the the cable could be unsynced with the chokes themselve..) any thoughts with that? voltage is...
  14. Member Introductions (No bike related problems)
    Just picked up this '96 750 SRAD yesterday morning to join my '91 FZR 600 and '88 Honda Hawk NT650. I've wanted a blue/white 750 since I was a kid and this is the coolest out there in my opinion (Not counting the 750RR/RK, but I'm about $30k short of that). You'll probably see me trying to track...
  15. Blast from the past

    Want to sell or trade. So i can get a newer model i dont feel guilty about upgrading and modding. Its a fun bike, but i almost feel bad about best mg the one to add wear on such a well upkept time capsule machine. Any offers or advice welcome
  16. SRADs (97-00 600 and 96-99 750)
    Hi All, First time posting on the SRAD forum and hoping for some advice please, the bike is holding revs if I blip to 6k and release it will stop at 3k for half a second then drop down all hoses are intact and intake rubbers look clean no splits so I am going to carb sync and thus my issue is...
  17. SRADs (97-00 600 and 96-99 750)
    Hi guys, new to the group and looking for some advice. I hadn't been able to use my bike for about 7 months. I managed to start it the other day and gave it a quick blast and filled it up with petrol. The next day my wife phones me to say the garage stinks of petrol. So when I get home from...
  18. SRADs (97-00 600 and 96-99 750)
    Hy I own a 600 SRAD from 1998 and facing a 3 cylinder working engine on it. The carbs have just been checked and tuned by the SUZUKI shop but after 10 miles the bike is running on 3 cylinder again. I've replaced the sparks by Iridium ones, changed the filters but no changes, the 4th cylinder is...
  19. SRADs (97-00 600 and 96-99 750)
    Hi all new to this and have a serious headake of a problem with a 1998 srad 600 not turning over. The clutch safety switch has been crossed and checked with a multi meter to clarify, same has been done with the kick stand switch and checked. All the relays have power and are opening and clicking...
  20. Parts and Gear
    I'm doing a restoration on my 1997 SRAD600. Does anyone know a source for factory parts? Specifically the fairing stabilizer bracket.
1-20 of 24 Results
Top