I just took on a huge project and will be turning to YouTube and the forums for guidance. I am rebuilding a motorcycle that one of my buddies wrecked on. The frame cracked in the wreck so I purchased a new one and replaced the cracked one. I need advice on what type of tools...
Hey guys I'm staring to replace my crankcase, due to some damage from a crash to the engine block. Can I reuse the same piston rings or would I need to replace them? The bike only has 9k miles and I don't want to replace them if its not necessary.
2017 GSXR 1000 9k miles
Things started off pretty bad, clutch cover had been left off, the basket had been laying in the weather for who knows how long, carbs were frozen along with one being partially disassembled, front brake master was seized, clutch master was seized, lots of parts missing, wrong rear wheel assy...
I have a 2000 600. I'm thinking about rebuilding the motor, but I might have a really good deal on a 2007 600 motor. My question is, how difficult would it be to put an 07 600 into a 00 600 frame? Should I rebuild my motor, or put the newer one in it? Any advice is greatly appreciated. Thanks