Suzuki GSX-R Motorcycle Forums Gixxer.com banner
gsxr 600
1-20 of 51 Results
  1. 04-05 GSX-R600/750
    Hi all, my speedometer is not working and only showing zero mph. I am looking to firstly change the sensor but can t fine one anywhere locally, only from USA. Does anyone know where I can get one in the UK, or better still in the Bristol area?
  2. 08-10 GSX-R600/750
    2008 Suzuki gsxr 600 wiring harness connector for headlight assembly harness. I just need the connector as I don't want to replace the whole harness looking for help finding a part number mine was unplugged and dropped down and melted on exhaust any help would be greatly appreciated.
  3. General Bike Talk
    Hello all and thank you for reading/ trying to help me with this problem. Recently my k6 gsxr 600 has started having the problem where a fireball will shoot out the back and then the f1 light will come on, tonight I decided to put it in dealer mode and find out the code and c34 came up. When I...
  4. 01-03 600 and 00-03 750
    So, I have this 03 GSXR 600. Right now it has a noticeable misfire. (The bike is shooting flames at 2k rpm). If you rev the bike to 5k (in neutral) and completely let go it doesn't immediately drop back to idle, it sticks at 3k rpm then slowly goes back to idle. Also its throwing code C34 which...
  5. GSX-R600/GSX-R750 General forum
    Hey guys, new to the group and to Suzuki. Has a stator issue, replaced it. Then had one of the bolts from the stator back out on me. It shredded the head off. I put blue lock tite on the other 2 bolts. I’m wondering if I’m okay to ride it with 2/3 bolts, as I’m in Canada and shipping is gonna...
  6. SRADs (97-00 600 and 96-99 750)
    Hi everyone! I don’t even know where to start with this but maybe I can get some help. So recently I bought a 2000 GSXR 600, started up fine and ran decent, rode her home about a 30 minute ride, everything was fine a little choppy in the lower rpm’s but needs a tune up, then the next day when I...
  7. 08-10 GSX-R600/750
    I'm brand new to the motorcycle club and am planning to sign-up for a gymkhana course to build my skills and confidence on my gsx-r 600. I'm looking for recommendations for frame sliders (or other crash protection) for my 2008 bike. Currently I'm looking at Evotech, Woodcraft, and R&G, but I...
  8. 06-07 GSX-R600/750
    Hey everyone, this is my first time posting a discussion so I will try my best to explain the situation as best as I can. Please help me find a solution! The bike was running good until I stopped for gas. Bike would not turn over. Put the key to “ON” position Kill switch on, oil pump primes Go...
  9. 06-07 GSX-R600/750
    Hey. I've been looking into getting a Gixxer for a while and came across this amazing GSXR 600 from -07. Everything about it is pretty good, however it has run 40.000 km's (about 25.000 miles), which is more than any of my other bikes that I've bought. Taking a further look into the pictures...
  10. 01-03 600 and 00-03 750
    What 750 engines could I use to do a engine swap on a 02 gsxr 600. And if I do it what all do I need?
  11. 11 - Present GSX-R600/750
    Hey, im looking for a yoshimura r-11 single exit for my gsxr 600 2016. However the only way to get the single exit one and not the dubble exit one is to buy the full system. But if I buy one thats made for a 1000 I can just buy the slipon. My question is does the thousand one fit my sixhundred...
  12. General Bike Talk
    I need some help my k6 600 was running great no mods other than a full exhaust system but the low beam headlight wasn't working, (side note the high beam was the blinkers still do the tail light works.) The I checked fuses nothing brand new battery still nothing. So I took the tank off checked...
  13. General Bike Talk
    Ordering a new fuel hose. I have a question the fuel line I have is broken up into two green lines separated by a simple gravity on/off petcock. Don’t know why. Guy probably ran out of hose. ANYWAY GETTING AN OEM fuel hose... is this the correct hose that goes from tank to carb? One hose, not...
  14. General Bike Talk
    See if y’all can solve me this: Cleaned carbs.. great. the FLOOD began. Initial thoughts. Needle seat o rings? Needle seats didn’t “click” when I forcefully pressed em back in...ok Didn’t adjust my floats at all. Could be it... BUT leaning towards other things BECAUSE— it hydrolocked, I removed...
  15. SRADs (97-00 600 and 96-99 750)
    hey all, 14k miles, just got her a couple days ago. Problem with longer idles. It needs 1/2 throttle to start. The choke does not have any use (even in cold) it just stalls it (which makes me think the the cable could be unsynced with the chokes themselve..) any thoughts with that? voltage is...
  16. SRADs (97-00 600 and 96-99 750)
    Recently bought a 99 GSXR600 and it's missing the right ram air intake tube and boots, I can't find any online besides the OEM warehouse sites and I'd hate to pay over a $100 for the whole thing. Does anyone have one laying around? or does a new model fit? I.E 2000 GSXR750?
  17. 04-05 GSX-R600/750
    Hey guys, I’ve just got myself a lovely GSXR600 K4 and got it for a fantastic price way below my budget so I’m planning a few upgrades/mods etc and would like an LED light for the front. Can this be done? And if so can anyone recommend which to be looking at, price, and who might be able to fit...
  18. 06-07 GSX-R600/750
    So here’s some history my 06gsxr 600 wasn’t running good an kept stalling. So I get it Home an now the relay only makes a tick when I try to turn it over. From my research I believe it has to do with one of the Starter idle gears. I also Checked all the safety sensors before hand. Any help would...
  19. 06-07 GSX-R600/750
    So here’s some history my 06gsxr 600 wasn’t running good an kept stalling. So I get it Home an now the relay only makes a tick when I try to turn it over. From my research I believe it has to do with one of the starter idle gears. I have no idea where to start an was hoping someone could lead me...
  20. SRADs (97-00 600 and 96-99 750)
    Hi All, First time posting on the SRAD forum and hoping for some advice please, the bike is holding revs if I blip to 6k and release it will stop at 3k for half a second then drop down all hoses are intact and intake rubbers look clean no splits so I am going to carb sync and thus my issue is...
1-20 of 51 Results
Top