Suzuki GSX-R Motorcycle Forums Gixxer.com banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. SRADs (97-00 600 and 96-99 750)
    Hello, I am on a mission to find different jets to use for my boyfriends 97 GSXR 600. He bought the bike in Colorado and rides there mostly at around 5k-7k feet. We have an upcoming trip to AZ which only has an elevation of 1k feet. I know we need to re-jet the carbs but I am having trouble...
  2. SRADs (97-00 600 and 96-99 750)
    Hi all... Had a headache with a set of carbs somebody been tampering before i got bike as project, Had to order 2 new slides as Tabs broken and glued, whole new body on number 1 due to snapped/missing emulsion tube, when bike was running was extremely rich on 3 cyls, splutters badly mid range...
  3. Oil Cooled Gixxers
    Hello gents, The carburetors on my 1986 GSXR-750G are damaged beyond repair, and I can not figure out the proper carb that belongs on my bike. My repair manual says its supposed to have CV type Mikuni BST31SS's, but when I took them out, I measured them at 29mm, and I cant find a model number...
  4. SRADs (97-00 600 and 96-99 750)
    Hey! Bike is a 1996 750 SRAD, 55000 km. Earlier this year it slowly began to run poor (one or two cylinders were clearly not giving everything, confirmed by plug color on cylinder 4). After I lifted the tank I saw that some sparks were jumping from the cables to the engine and one carb was...
  5. 01-03 600 and 00-03 750
    So apparently I bought a “2003” Gsxr600. I thought it was fuel injected (based off of research prior to buying) But when I opened up the air box and looked underneath itlooks directly carb’ed, no fuel injectors in sight. Now I’m confused, was I told the wrong year of the bike? Was this motor...
  6. SRADs (97-00 600 and 96-99 750)
    Hi folks, Just resolved hydrolock problem I had (petcock passing and flooding engine through carbs). Fitted repair kit to my carbs and gave them a good clean out. Tried to start the bike at the 2.5 turns on the screw, wouldnt start was just cranking. I thought I would change to 2 turns as...
1-6 of 6 Results
Top