Help with potential purchase involving set delete/pin 30 - Suzuki GSX-R Motorcycle Forums Gixxer.com
 
LinkBack Thread Tools Display Modes
post #1 of 5 (permalink) Old 03-12-2019, 08:52 PM Thread Starter
Squid
 
Join Date: Mar 2019
Posts: 3
Help with potential purchase involving set delete/pin 30

I’m looking at an 06 Gsxr 750. It has the set valve delete and currently the finlight is on. From what I’ve read the light can be disabled by removing pin 30 wire from the ecu connector. It appears to be the black connector if I’m not mistaken. I have a few questions. Does this pin 30 wire disable the fi light from coming on in the instance of another fault detected with the system? Or just for the set valve? Also I’ve seen 2 separate videos showing what plug to pull the pin from. They each showed the plug on the opposite side of the bike. One showed the black connector on the clutch lever side and the other on the brake lever side. Both indicated it was the black connector not the gray but they were in different positions. Why is this? Also I’ve read a few posts of people who disconnected pin 30 and their bike won’t start. Is this simply because they may have disconnected the wrong wire? Or does this sometimes happen even when the correct wire is disconnected. I basically am wondering if I can get this light off if I purchase the bike. Attached is the 2 videos I watched showing the connector located on different sides.

This shows the connector on brake lever side
https://youtu.be/0bjKQYc0vcE

This shows the connector on clutch lever side
https://youtu.be/QR7xvn_ikBI
Motorcyclejunky22 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 03-12-2019, 10:23 PM
Hand-Eye Coordinator
 
MacBayne's Avatar
 
Join Date: Jun 2008
Location: Edmonton AB
Motorcycle: 2014 675R, 2019 Husky TE300i, 2014 Grom. Yes, Grom, fuck you, it's fun.
Posts: 6,509
Re: Help with potential purchase involving set delete/pin 30

Go here: https://www.gixxer.com/forums/137-08...ots-links.html
MacBayne is offline  
post #3 of 5 (permalink) Old 03-13-2019, 04:35 AM Thread Starter
Squid
 
Join Date: Mar 2019
Posts: 3
Quote:
Originally Posted by MacBayne View Post
I followed the link and clicked on the set valve removal and the pictures don’t show up 😞
Motorcyclejunky22 is offline  
Sponsored Links
Advertisement
 
post #4 of 5 (permalink) Old 03-13-2019, 05:09 AM Thread Starter
Squid
 
Join Date: Mar 2019
Posts: 3
I’ve recently stumbled upon something known as a servo buddy. Could this work if I purchase the bike? Just plug it in to the connection?
Motorcyclejunky22 is offline  
post #5 of 5 (permalink) Old 03-13-2019, 06:07 PM
Hand-Eye Coordinator
 
MacBayne's Avatar
 
Join Date: Jun 2008
Location: Edmonton AB
Motorcycle: 2014 675R, 2019 Husky TE300i, 2014 Grom. Yes, Grom, fuck you, it's fun.
Posts: 6,509
Re: Help with potential purchase involving set delete/pin 30

One does not need pics to find pin 30. Look at the black ECM connector with the clip oriented at the top. The pins are numbered L-R, top row, followed by bottom. That's in the thread...

The reason I linked you to THAT page and not the SET specific page is so that you would see the dealer mode post, too.

Must I hold your hand?
MacBayne is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki GSX-R Motorcycle Forums Gixxer.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
[DIY] - SET DISABLING (pics) _YcE_StRe3t_ 06-07 GSX-R600/750 60 09-26-2014 06:42 PM
For those who want to REMOVE the SET valve... No FI code and No cut wires 0-SixGix 06-07 GSX-R600/750 10 04-11-2007 06:56 PM
tv ?'s. plasma, lcd, dlp, etc.. bmfgsxr Anything Goes 37 06-30-2006 09:15 AM
An Interesting Story Involving Stolen R6 Parts... bmfgsxr Club Racer 16 02-24-2005 02:22 PM
SET Valve doesn't work on my K2 Reincheck GSX-R1000 General Forum 5 06-21-2004 08:05 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome