Re: One P*S*ed Person!
All you need is 1 small metal mallett and 1 ball hammer and a vice.
Fit the chain on, clip the rivit link on and angle the vice and maybe a small piece of metal over the chain so it presses on the link plate onto the two pins.
Keep squishing it down untill you see the two pin heads showing their grove sticking out of the rivit plate.
Take the vice off, place the mallet hammer so that back of the chain has something to press against, and gently tap the two pins so the top flays out over the plate, holding it in place.
Your chain will be rivetted in place then
Alternativly, you can buy a decent chain breaker and riviter rom Motrax etc for £50-60 starting price. Riviters on thier own are cheaper.
But I did my chain and sprockets using a junior hacksaw and this method, took ages but has lasted me 2 years so far safley. Good luck