K9 GSXR 1000 FI code C46
Having an issue with my GSXR. The previous owner installed a full Akrapovic exhaust, K&N air filter, and had the bike flashed. He informed me that the FI light was on due to the exhaust servo being removed. I recently put the bike in dealer mode just to confirm and it displayed C46 which does indicate an issue with the exhaust valve. So I decided to purchase the servo buddy to remedy the issue.
Now this is where the problems starts. When I went to install the servo buddy, the servo plug on the bike was nowhere to be found. I traced back every wire and plug to be sure I didn't miss anything and it's just not there. I'm hoping it wasn't cut off.
At this point I don't know what else to do but to send back the servo buddy and pull the wire from the ECU to remove the fault light.
I would appreciate any suggestions or inputs on what to do from here.