Hi guys, I am doing a custom build and want to install a csxr 1000 3 wire speed sensor to a rotoscope pro, here is my question, do I just connect to power, and ground then signal wire to the motoscope pro or is there something I am missing?
You should listen to me. No, seriously, listen to me.
Join Date: Oct 2008
Location: Santa Barbara
Motorcycle: Blue 2006 GSX-R1000
Re: 1000 speed sensor
"is there a way to test the sensor to see if it works?"
Yes. See a service manual. The test procedure is described in the Electrical>Combination meter>Inspection>Speed Sensor section. You need a voltmeter, 12 V supply, 10 kΩ resistor, and a screwdriver. I think that Suzuki has been using the same sensor on many models for some time.