All your engine questions here...... - Page 21 - Suzuki GSX-R Motorcycle Forums Gixxer.com

 6Likes
Reply
 
LinkBack Thread Tools Display Modes
post #401 of 412 (permalink) Old 03-25-2019, 07:34 AM
Guest
 
oldgixxer's Avatar
 
Join Date: Jan 2001
Location: In the garage, smoking one of Anthony D's cigars...
Motorcycle: None, gave them all to Anthony D...
Posts: 24,542
Re: All your engine questions here......

Use the OEM CR9E,you are gaining zero performance and throwing money away for nothing.
Verify the coil is firing on that cylinder,if it is...then see below

If the plug looks as described,consider doing a compression or leak-down test on that cylinder.
oldgixxer is offline  
Sponsored Links
Advertisement
 
post #402 of 412 (permalink) Old 03-25-2019, 07:38 AM
Squid
 
Join Date: Mar 2019
Posts: 7
Ok I'll do that tonight ..... Honestly didn't even know I was buying a "performance" plug at first..... I'll update soon!!
Louis Chader is offline  
post #403 of 412 (permalink) Old 03-25-2019, 07:38 AM
Squid
 
Join Date: Mar 2019
Posts: 7
Any idea how much psi those cylinders should hold?
Louis Chader is offline  
Sponsored Links
Advertisement
 
post #404 of 412 (permalink) Old 03-25-2019, 07:48 AM
Guest
 
oldgixxer's Avatar
 
Join Date: Jan 2001
Location: In the garage, smoking one of Anthony D's cigars...
Motorcycle: None, gave them all to Anthony D...
Posts: 24,542
Re: All your engine questions here......

You'll have to source a FSM and verify the numbers or maybe one of our members knows off the top of their head,I don't know what they should be....but you can check all 4cyls and they should all be within 5-10% of one another. So if 3 cyls are between 140-150psi and one is 110 then you know whats up.
oldgixxer is offline  
post #405 of 412 (permalink) Old 05-22-2019, 03:00 PM
Squid
 
Join Date: May 2019
Posts: 3
750 motor swap into my 08 gsxr 600

So i blew my 08 600 motor (first year with mode selector) im thinking about dropping a 750 gsxr motor into it. But i would like to know what all components i will need including parts from my gsxr 600 and for the 750. Also, what is the min/max year of the 750 motor i can put into my frame? Ive heard that 06-09 750 motor will drop into my 08 600 with the addition of needing the throttle bodies, ecu, and air box? Is this correct? Id appreciate any feedback, new to the site also!
ColinGSXR600Shevlin is offline  
post #406 of 412 (permalink) Old 05-29-2019, 10:48 AM
Squid
 
Join Date: May 2019
Posts: 6
I have a yoshimura edition gsxr 600 k5.
Opened it up to check the condition after buying it.
Does anyone know if it’s factory set that the timing is different.

The timing mark nr 1 doesn’t line up with tdc or the markings. Also, the pins between 2 and 3 should be 12, according to the manual.
However it’s on pin 11.
Attached Images
File Type: jpg 6C5E2D3C-3499-4980-B197-4C96EC36EE3F_1559144903867.jpg (214.2 KB, 9 views)
File Type: png B4DC425B-D3A6-47C9-8419-EC19E3805B98_1559145057830.png (1.27 MB, 18 views)

Last edited by Cdvl; 05-29-2019 at 10:51 AM.
Cdvl is offline  
post #407 of 412 (permalink) Old 05-29-2019, 11:07 AM
Dreaming of buttsecks for years...
 
TheGeek's Avatar
 
Join Date: Feb 2006
Location: Indiana
Motorcycle: Anniversary Edition 600 & 2018 Harley Street Glide
Posts: 13,266
Garage
Re: All your engine questions here......

Like the full on Yoshimura worked over bike? I would think that the Yosh bike would have their adjustable cams and those are obviously stock. It looks like you're a tooth of to me, but without tech data on the Yosh model (and without actual confirmation of your's being a yosh) I can't recommend adjusting it.

Got pics of the entire bike? If it's a Yosh, it'll be pretty obvious.
TheGeek is offline  
post #408 of 412 (permalink) Old 05-29-2019, 11:34 AM
Squid
 
Join Date: May 2019
Posts: 6
Quote:
Originally Posted by TheGeek View Post
Like the full on Yoshimura worked over bike? I would think that the Yosh bike would have their adjustable cams and those are obviously stock. It looks like you're a tooth of to me, but without tech data on the Yosh model (and without actual confirmation of your's being a yosh) I can't recommend adjusting it.

Got pics of the entire bike? If it's a Yosh, it'll be pretty obvious.
It’s Yoshimura branded as far as I know. It got the full exhaust and yoshimura markings on the foot steps too.

So I should put everything back to as the manual says?
The valve clearance are all in spec though.
Attached Images
File Type: jpg 3574DC24-50A1-4C10-98EF-BF4EF8FC0DC4_1559147642158.jpg (159.6 KB, 3 views)

Last edited by Cdvl; 05-30-2019 at 03:02 AM.
Cdvl is offline  
post #409 of 412 (permalink) Old 05-29-2019, 06:26 PM
Dreaming of buttsecks for years...
 
TheGeek's Avatar
 
Join Date: Feb 2006
Location: Indiana
Motorcycle: Anniversary Edition 600 & 2018 Harley Street Glide
Posts: 13,266
Garage
Re: All your engine questions here......

That's a stock GSXR with some Yoshimura bolt on parts. The Yosh factory bike has a very unique body. You need to fix your cam timing. Inspect the crank position to see if the exhaust cam is a tooth behind, or the intake is a tooth ahead.
TheGeek is offline  
post #410 of 412 (permalink) Old 06-03-2019, 03:31 PM
Squid
 
Join Date: May 2019
Posts: 6
Quote:
Originally Posted by TheGeek View Post
That's a stock GSXR with some Yoshimura bolt on parts. The Yosh factory bike has a very unique body. You need to fix your cam timing. Inspect the crank position to see if the exhaust cam is a tooth behind, or the intake is a tooth ahead.
Thanks a lot!
Crank doesn’t line up. So I think I need to check valves then.
It drove fine until it began to rattle. And I thought it would be the cct. But that seems a bit early at 18k km.
The engine picture above is like that when the markings on the clutch case and crank is lined up.

Last edited by Cdvl; 06-03-2019 at 08:21 PM.
Cdvl is offline  
post #411 of 412 (permalink) Old 06-04-2019, 08:16 AM
Dreaming of buttsecks for years...
 
TheGeek's Avatar
 
Join Date: Feb 2006
Location: Indiana
Motorcycle: Anniversary Edition 600 & 2018 Harley Street Glide
Posts: 13,266
Garage
Re: All your engine questions here......

The previous CCT issues don't apply to the newer bikes, but everyone seems not understand that. It's possible the previous owner screwed with it and hopped the chain. There's an inspection plug on the right side of the bike on the crank cover. Remove it and turn the engine clockwise until the mark there lines up. See where your cams are. If nothing lines up, rotate one full revolution. Then adjust your cam timing accordingly. To do that, you'll have to pull the right cam cap and CCT, so you'll have an opportunity to inspect it.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Never mistake education for intelligence.

"Don't go ninjain nobody that don't need ninjain" -
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
TheGeek is offline  
post #412 of 412 (permalink) Old 06-04-2019, 02:48 PM
Squid
 
Join Date: May 2019
Posts: 6
Yes. Thanks. The timing mark on the cover is lined up. The cams definitely jumped then. Because the 1 and 2 mark on the exhaust cam does not line up with the cilinderhead vertically and horizontally.

I’ll put the cams back as the manual say and start it up to check how it’s running.

Thank you for your help and patience.
Attached Images
File Type: jpg 89617939-64AA-404A-9EC8-A3BDD4257348_1559685501991.jpg (203.7 KB, 4 views)

Last edited by Cdvl; 06-04-2019 at 04:58 PM.
Cdvl is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki GSX-R Motorcycle Forums Gixxer.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome