Question on my 711 - Suzuki GSX-R Motorcycle Forums Gixxer.com

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old 01-06-2017, 07:22 AM Thread Starter
Squid
 
Join Date: Mar 2016
Posts: 17
Garage
Question on my 711

I rode all summer on my 711. At the end of the summer my chain broke and wrapped around my drive sprocket. This broke the area around the seal for the shift rod. it wasn't all that bad and I was going to install a new seal and fix the area with JB weld to hold the seal in place. A closer look last night there is a hair line crack coming from this area in the crank case.

I am wondering if I am able to use the crank case from my 94 750 on my 96 1100 motor..
1. Can I just take the top end parts and put on the 750 crank case? (top end being jugs, head, pistons, rods and I am guessing timing chain since the 1100 is taller)
2. Are the gear ratios the same?

I know that the 750 is cable clutch and the 1100 is hydo clutch. that's not a big deal to me right now. I just want to get it running and I don't think that JB weld on a crack will hold when the crank heats and cools.

thanks in advance
Green


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
mrgreen98ski is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 01-06-2017, 08:21 AM Thread Starter
Squid
 
Join Date: Mar 2016
Posts: 17
Garage
Re: Question on my 711

the crank may be different too?
mrgreen98ski is offline  
post #3 of 9 (permalink) Old 01-06-2017, 02:33 PM
Lifetime Premium
 
wombat58's Avatar
 
Join Date: Jul 2003
Location: Sydney, Australia
Motorcycle: GSXR1100 WS
Posts: 202
Re: Question on my 711

Crank, oil pump, clutch, timing chain, tensioner, selector mechanism (including shift rod) and gearbox are all different. However, you can move all the internals from the 1100 cases to the 750 cases successfully. Done it, raced it, no problems.
wombat58 is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 01-06-2017, 06:20 PM
Expert
 
HeJason's Avatar
 
Join Date: Jun 2002
Location: Vernon, CT
Motorcycle: 02 GSXR turbo 1k, 02 GSXR 1070, 86 GSXR 750 (92 1216 motor), 89 FZR 1000 (1070 motor), 94 GSXR 750 (95 1146 motor), BigBore 00 Busa
Posts: 1,884
Garage
Re: Question on my 711

Quote:
Originally Posted by wombat58 View Post
Crank, oil pump, clutch, timing chain, tensioner, selector mechanism (including shift rod) and gearbox are all different. However, you can move all the internals from the 1100 cases to the 750 cases successfully. Done it, raced it, no problems.
Will the 1100 jugs fit on the 750 cases with out machining? Would it not be just easier to weld the crack on the 1100 cases. I have done that before, but never tried putting 1100 jugs on 750 cases. I had to machine the jugs on my old oil cooled 1052 motor to fit 1127 jugs on it.
HeJason is offline  
post #5 of 9 (permalink) Old 01-06-2017, 07:26 PM Thread Starter
Squid
 
Join Date: Mar 2016
Posts: 17
Garage
Re: Question on my 711

Quote:
Originally Posted by wombat58 View Post
Crank, oil pump, clutch, timing chain, tensioner, selector mechanism (including shift rod) and gearbox are all different. However, you can move all the internals from the 1100 cases to the 750 cases successfully. Done it, raced it, no problems.
internals like crank on up to the pistons?

can you tell me what internals?

thank you
Green
mrgreen98ski is offline  
post #6 of 9 (permalink) Old 01-06-2017, 07:28 PM Thread Starter
Squid
 
Join Date: Mar 2016
Posts: 17
Garage
Re: Question on my 711

Quote:
Originally Posted by HeJason View Post
Will the 1100 jugs fit on the 750 cases with out machining? Would it not be just easier to weld the crack on the 1100 cases. I have done that before, but never tried putting 1100 jugs on 750 cases. I had to machine the jugs on my old oil cooled 1052 motor to fit 1127 jugs on it.
that is what i was hoping to do, put the 1100 jugs and all on the 750 case. crank also if needed. i could careless if is a cable or hydro clutch.
mrgreen98ski is offline  
post #7 of 9 (permalink) Old 01-07-2017, 07:48 AM Thread Starter
Squid
 
Join Date: Mar 2016
Posts: 17
Garage
Re: Question on my 711

I apologize for miss using terminology. I am not wanting to put jugs on my bike. I am asking about the cylinders.

I was reading on another post someone saying that you can put the 1100 crank, rods, pistons, cylinders, and head on the 750 lower but you need to you the RF900 clutch basket to mate with the 1100 crank due to the 6th gear in the 750. can anyone confirm this?

i'll try to find the post again
mrgreen98ski is offline  
post #8 of 9 (permalink) Old 01-07-2017, 08:14 AM Thread Starter
Squid
 
Join Date: Mar 2016
Posts: 17
Garage
Re: Question on my 711

here is the post I found in water cooled section. not sure of the years he is referring too.

https://www.gixxer.com/forums/16-wate...ons-750-a.html
mrgreen98ski is offline  
post #9 of 9 (permalink) Old 01-13-2017, 02:17 AM
Lifetime Premium
 
wombat58's Avatar
 
Join Date: Jul 2003
Location: Sydney, Australia
Motorcycle: GSXR1100 WS
Posts: 202
Re: Question on my 711

Everything that can be unbolted or unscrewed has to be moved from the 1100 cases across to the 750 cases to use them. The only common parts I can think of are the water pump and a small selector drum roller detent. Main bearings will have to be replaced to suit the case codes.
wombat58 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki GSX-R Motorcycle Forums Gixxer.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome