Power issues with coil 2
Hey guys, new here, hoping to get some help.
I have an 83 GSX250 that is in the middle of a cafe racer renovation. I’ve recently gutted the loom and cleaned up a lot of the snipped ends and chopped/respliced wires.
I have power and spark to coil 1 but no power to coil 2. I chucked a multimeter onto the coil leads for both coils and get a consistent 12v to coil 1 but no 12v to coil 2 (although I do get trigger when I crank it). I have no idea how this could be happening. Any ideas would be greatly appreciated.