88-92 750 and 89-92 1100 Parts Interchange Info - Page 8 - Suzuki GSX-R Motorcycle Forums Gixxer.com

 10Likes
Reply
 
LinkBack Thread Tools Display Modes
post #141 of 159 (permalink) Old 11-21-2015, 04:48 PM
Squid
 
deadlock's Avatar
 
Join Date: Nov 2015
Posts: 5
bandit gearbox and gsxr head timing chain

i am currently building a new motor consisting of a 1200 bandit gearbox, 1216 wiseco pistons and 1127 GSXR barrels and head, cams etc
all seems well the barrels have obviously been bored and the head is on, i had to change the cam sprockets for bandit ones to match the multiplate timing chain that was in the gearbox and it is ready to have the rocker cover bolted on and be installed in my 86 slabby streetfighter

i am slightly concerned however with the amount of play on the timing chain. it has the gsxr adjuster and i honestly cant remember if the guides i fitted were gsxr or bandit but there is far more play in the chain than i expected and was wondering if anyone has done this before and had a similar problem or if its anything t o worry about?
deadlock is offline  
Sponsored Links
Advertisement
 
post #142 of 159 (permalink) Old 11-23-2015, 01:51 PM
The other OG
 
old gsxr's Avatar
 
Join Date: Oct 2007
Location: murgon qld.AUSTRALIA
Posts: 6,334
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

buy 2 sets gsxr,bandit and use the lesser play in the chain
old gsxr is offline  
post #143 of 159 (permalink) Old 12-12-2015, 04:39 AM
Squid
 
Join Date: Dec 2015
Posts: 1
Hi I'm chasing something in particular in differences mainly, but I've been told that a 87 gsxr750 frame is heaps lighter than 87 1100, I do realise that there will be difference in weight but wondering if any one knows particulars, be it with swingarm and rear suspension or just the frame?? Thanks
Danyal is offline  
Sponsored Links
Advertisement
 
post #144 of 159 (permalink) Old 12-12-2015, 08:11 PM
Master Debater
 
JamminJesus's Avatar
 
Join Date: Oct 2014
Location: Monrovia, CA
Motorcycle: 92 GSX-R750 oil boiler, 92 CB750, 08 CBR1000RR, 2011 BMW R1200GS, 12 CBR250R
Posts: 587
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

Hey Danyal,
This is not the correct thread for your question but I can tell you it is the frame. The swingarm and rear suspension are basicly the same other than the spring.
JamminJesus is offline  
post #145 of 159 (permalink) Old 09-13-2016, 12:57 PM
Squid
 
Join Date: Apr 2012
Posts: 3
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

I am looking for information about compatibility Swingarm Rear
(Thanks , greetings from spain)

Last edited by garrido8; 09-13-2016 at 06:24 PM.
garrido8 is offline  
post #146 of 159 (permalink) Old 09-13-2016, 04:57 PM
Amateur
 
Gixxerider86's Avatar
 
Join Date: Jul 2014
Location: San Antonio and Houston
Motorcycle: 1986 GSXR 815, 2002 Bandit 1200N
Posts: 828
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

an old trick I'm sure many of you guys already might know, but in regards to aftermarket or oem parts, whether it be fork seals, bearings, brake pads, etc. an easy way to check for compatibility is by looking at aftermarket part numbers. for example, in the event that you're at a dealership and have to order your fork seals since they don't have some on hand. look at that aftermarket part number and go through the list of bike makes and models in the parts catalog and find some that use the same part number. bingo, that bike's OEM fork seals will work on your bike, and chance are those OEM parts might be on hand. sometimes it comes out even cheaper. I've got fork oil and dust seals from a 2011 Honda CBR 1000 on my 2002 Suzuki Bandit 1200
JamminJesus likes this.

G86
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Gixxerider86 is offline  
post #147 of 159 (permalink) Old 10-21-2016, 06:42 AM
Squid
 
Join Date: Jul 2016
Posts: 12
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

anybody know if gsxr 600-750. 2006-2007 front & rear rims fit on my 1992 gsxr 1100 ? thanks
ktalgsto2 is offline  
post #148 of 159 (permalink) Old 11-25-2016, 02:23 AM
Squid
 
Join Date: Nov 2016
Posts: 6
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

Can I use a 1990 gsxr750 drive shaft (output) shaft on my 1990 gsxr1100?
GsxrGluten is offline  
post #149 of 159 (permalink) Old 11-25-2016, 08:11 PM
Lifetime Premium
 
Mackk's Avatar
 
Join Date: Oct 2016
Posts: 32
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

So I read the interchange info, and just wanted to make sure I understand correctly.

I have an 89 1100 and the nose cone (upper) has had some poor repairs Before I owned it and it's not a good piece for resto.

A few questions/confirmations

1. I can use a slingshot 750 upper as long as I also use 750 mids?

2. The lowers are the same 750 and 1100 except for location of bolt holes to connect to mids?

3. I will need to fill the excisting bolt holes on lowers, and drill new ones to line up with 750 mids? Or does it make more sense to drill mids to fit lowers?

4. The interchange info mentions bar clearance issues? I assume that's trying to put 1100 fairing on a 750 as they have lower bars? So going 750 fairing on an 1100 shouldn't be an issue?

Thanks for looking, any other info will be greatly appreciated.


Cheers

Last edited by Mackk; 11-25-2016 at 08:16 PM.
Mackk is offline  
post #150 of 159 (permalink) Old 11-26-2016, 12:49 AM
Squid
 
Join Date: Nov 2016
Posts: 6
Interchangeable ?

How bout the transmission output shaft? Can I use one from a 1990 gsxr750 in my 1990 gsxr1100?
GsxrGluten is offline  
post #151 of 159 (permalink) Old 11-26-2016, 11:15 AM
Amateur
 
Gixxerider86's Avatar
 
Join Date: Jul 2014
Location: San Antonio and Houston
Motorcycle: 1986 GSXR 815, 2002 Bandit 1200N
Posts: 828
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

this isnt a place to ask questions, this is for known swaps only. make your own thread and someone will respond, or do a lil more research on here and you might find your answer.
Gixxerider86 is offline  
post #152 of 159 (permalink) Old 01-13-2017, 07:05 AM
Lifetime Premium
 
Join Date: Jun 2016
Posts: 40
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

Can I fit the Yoshimra exhaust system for 1. gen gsxr 750 on my 2. gen. Gsxr 750 L 1990?
Carl750 is offline  
post #153 of 159 (permalink) Old 04-29-2017, 11:25 PM
Amateur
 
Gixxerider86's Avatar
 
Join Date: Jul 2014
Location: San Antonio and Houston
Motorcycle: 1986 GSXR 815, 2002 Bandit 1200N
Posts: 828
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

didn't see it here so ill post since I just discovered it

- regarding the rear brake, the master cylinder is pretty much universal between all oil-cooled GSXR's, all years bandit 6 and 12's, and rf 600 and 900's from '94-'97

- the rear caliper is identical between all oil-cooled gsxr's. its been mentioned that sv650 rear caliper bolts on, which means '99-'02 sv650 and '98-'06 kat 600 and 750 rear calipers will work since they all use the same hanger. I could bet money that the RF's and bandits also are interchangeable since they look nearly identical. the early katana caliper WILL NOT work since they were mounted above the swing arm, when rotated below the swingarm the connector for the torque arm will be on the opposite side.

G86
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Gixxerider86 is offline  
post #154 of 159 (permalink) Old 06-24-2017, 09:52 PM
Track Day Winner
 
Join Date: Dec 2014
Posts: 70
Re: Updated Parts Interchange: 88-92 750 and 89-92 1100

Quote:
Originally Posted by Bones_GSXR View Post
If you have something to add post a reply and I will add it to the List. I know with a lttle work ANYTHING can be adapted but this is more for the Direct swaps.

Engines:
All swap. Air/Oil is Air /Oil be it 600, 750 or 1200 Bandit, 600, 750 or 1100 Katana, or 750 or 1100 GSXR.

Here's a chart for wheel swaps.........
I cannot source another GSXR 750 91 so I am looking for options. Has to be a 750 otherwise will need re-vin.

So far, based on some posts here and some research (which is attached as images) I can only say:

Electrics, coils, crankcase, mounts, intake boots, carb slignment are the same on 88, 89, 90, 91 and 92.
But then the individual carb bodies seems to be the same just on 91 and 91.

Could anyone confirm if my 91 carb could work on a 88, 89, 90 or 92 engine?
Or if there is anything I am missing?

Last edited by gkmaia; 06-24-2017 at 09:56 PM.
gkmaia is offline  
post #155 of 159 (permalink) Old 07-03-2017, 11:17 AM
Squid
 
Join Date: Jul 2017
Posts: 2
Hi. Just wondering if my gear shift shaft on my 750 1989 can be swiped from another model? Cheers
Zoo666 is offline  
post #156 of 159 (permalink) Old 09-26-2017, 09:38 PM
Squid
 
Join Date: Sep 2010
Motorcycle: 2009 GSXR600, 2009 ZX6R, 2009 FZ1, 2006 DRZ400SM
Posts: 5
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

Please confirm. I have a 1989 Gsxr750 that i am building into a race bike. I want to run 180 rear slicks on 5.5 inch rear wheel.
Can i run any gsxr600, 750, 1100 rear wheels 1990-1995? As long as I run the equivalent cush drive?

Any other concerns or requirements?

Thanks
davelaporte is offline  
post #157 of 159 (permalink) Old 09-30-2017, 02:00 PM
Squid
 
Join Date: Sep 2017
Posts: 1
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

New to the gixxer life trying to find a better exhaust than the stock trying to cool the engine a lil more than what its at atm trying to find a sidewinder but i have a 1998 gsxr1100 and so far no luck on finding basically any parts anyone know what years i can play with to make it work or if there is a way to get aftermarket or custom built. any help is appreciated
Derpen is offline  
post #158 of 159 (permalink) Old 10-01-2017, 06:05 PM
Amateur
 
Gixxerider86's Avatar
 
Join Date: Jul 2014
Location: San Antonio and Houston
Motorcycle: 1986 GSXR 815, 2002 Bandit 1200N
Posts: 828
Re: 88-92 750 and 89-92 1100 Parts Interchange Info

can the moderators please clean up this thread? THIS IS FOR KNOWN SWAPS AND INTERCHANGEABLE PARTS ONLY take your questions to the appropriate forum and they will get answers

thanks.
potshot likes this.
Gixxerider86 is offline  
post #159 of 159 (permalink) Old 01-28-2018, 07:28 AM
Squid
 
Join Date: Sep 2010
Motorcycle: 2009 GSXR600, 2009 ZX6R, 2009 FZ1, 2006 DRZ400SM
Posts: 5
Re: Updated Parts Interchange: 88-92 750 and 89-92 1100

The rear wheel swap for 1989 Gsxr 750 is not correct. I have used a 1991 1100 wheel with spacers and no problem. 1992 750 rear wheel, 1993 750 rear wheel, and 1994 1100 rear wheels do NOT fit because the brake rotor is offset approximately 12 mm towards the centre line.

In doing the 5.5 inch swap, no water cooled rear works. The 92 and newer oil cooled also do not work with the 89 caliper setup.

The purpose of the 5.5 inch swap is to run 180 modern rubber. You cannot change the rear caliper to compensate and you should not “shim” the rotor because the totor bolts will not have the correct bite or seat properly.

If you place a straight edge on the rotor, that edge will be above the edge of the rims that fit but will be flush with the rims that are not compatible.

The other clue is the rims that fit have the rim information on the face of the rim where the rims that do not bolt in have the info on the spoke.
davelaporte is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki GSX-R Motorcycle Forums Gixxer.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome