Desperate for help/advice. : Suzuki GSX-R Motorcycle Forums: Gixxer.com

**gixxe_r** · 04-30-2011, 02:21 AM

I am a victim of the gixxer herky jerky problem. O2 sensor has been replaced twice under warranty it keeps going. after so little miles. I have got M4 slip on with cat still there along set valve and O2 sensor.
Im considering keeping the cat on along set valve but get rid of the O2 sensor with PCV. is this a good move? sorry i am a noob, educate me.

**mferg-tsr** · 04-30-2011, 01:28 PM

remove set valve and your problem should go away if its the same issue i had.

**sarksoul** · 04-30-2011, 03:40 PM

Quote:

Originally Posted by mferg-tsr

remove set valve and your problem should go away if its the same issue i had.

+750
or put the eliminator plug in the o2 sensor plug and the bike runs good because you cant use the pcv with the o2 sensor anyway!

**gixxe_r** · 05-01-2011, 12:45 AM

The culprit is the O2 sensor. I understand when using pcv the O2 sensor is eliminated with the provided kit. Question is: Can i just eliminate the O2, use pcv, keep set valve and keep the cat?

**sarksoul** · 05-01-2011, 02:05 AM

Quote:

Originally Posted by gixxe_r

The culprit is the O2 sensor. I understand when using pcv the O2 sensor is eliminated with the provided kit. Question is: Can i just eliminate the O2, use pcv, keep set valve and keep the cat?

do it!!!!